Manual electrostatic thermal spray coating machine
1.Machine introduction:
1. Voltage/electric current LED display on the front panel.
2. The transformer close the spray nozzle, the voltage loses lowly.
3. The electric discharge effect is superior, the rate of intake powder is high.
4. The direct-viewing air-flow meter demonstrates the operation.
5. The powder sprayed out is even and stable.Can charge the powder continuously to coat well object's deepest corner.
6. The spray gun is portable and services long life , controls the switch by magnetism.
7. The gun can match nozzle with different shape.
8. The powder barrel made of stainless steel is convenient for cleaning the powder.
9. Used broadly in steel coating, aluminum coating, metal powder coating, epoxy powder coating, polyester powder coating etc.
10.Reduce orange peel effect significantly compare to common Electrostatic Coating
2.Technical parameters:
Model | HTO-IEP19 |
Control Unit | |
Input Voltage | 210v/240v 50Hz |
Power Frequency | 50VA |
Power Input | 35W |
Current Output | 100mA |
Control Voltage of electromagnetic valve | AC24V |
Protection Level | IP54 |
Voltage Output of Transformer | 24V,15V |
Safety Fuse | 1.5A |
Display Mode | LED |
Pneumatic controller | |
Input Air Pressure | 8dar |
Output Air Pressure | 0.2-0.6dar(powder gas) |
Output Air Pressure | 0-0.025(pulverization gas) |
Electromagnetic voltage | AC24V |
Spary gun | |
Input valtage | 24v |
Output voltage | 0-90kv |
Control voltage | AC24V |
3.Contact information:
If you need further information, please contact us freely, we will do our best to cooperate with you.