HARVEST “S-series” Steel Fibre Product Data Sheet
HARVEST "S-series" fibres are slitting steel sheet fibres for refractories materials for the high temperature processing industries (Metallurgy, petrochemical, cement, glass, power station and other furnaces).and also for reinforced concrete.
HARVEST Stainless Steel Fibre S-304/25/50SP
Chemical Analysis (%):
Alloy No. | Cr | Ni | C≤ | Si≤ | Mn≤ | P≤ | S≤ |
304 | 17-19 | 8-11 | 0.15 | 1.0 | 2.0 | 0.04 | 0.03 |
*Other materials :430/310/330/316…& low carbon steel can be manufactured specifically to suit customer’s requirements.
Service Temperature:
Melting Point | Recommended Maximum Service Temperature | ||||
304 | 1410-1480℃ | Cyclic Heating | 1100℃ | Continuous Service | 1000℃ |
Dimensions:
Lengths are 10/15/25/30/50/60mm. Other lengths can be manufactured specifically to suit customer’s requirements.
Widths are 0.5/0.7/1.0mm. Other width can be manufactured specifically to suit customer’s requirements.
- Thickness are 0.4/0.5/0.6mm. Other thickness can be manufactured specifically to suit customer’s requirements
Packing:
- Fibres are packed in 1/5/10/20kg cartons then put on pallets. Other packaging can be supplied if requested.
Using method and using quantity:
- Usually use 1-5% ( volume ) of steel fiber in refractories or concrete materials, mixed evenly to maximize the use effect of steel fiber into full play. Mix method :1. Wet mix; 2. Dry mix.
- In order to prevent explosions & radiation for concrete buildings , it is recommended to use steel fibres number 40-60% (volume).
Health & Safety:
USING STEEL FIBRES UNDER NORMAL CONDITIONS DOES NOT PRESENT AN INHALATION, INGESTION OR CONTACT HEALTH HAZARD.
BECAUSE OF THEIR PHYSICAL NATURE, WE RECOMMEND THAT OPERATIVES HANDLING THE FIBRES SHOULD ALWAYS WEAR GLOVES.
TO AVOID DETERIORATION OF PACKING, THE FIBRES SHOULD BE STORED IN A DRY ENVIRONMENT.
