Specifications
1.Thickness:0.3-0.4mm2.Aperture:7*11-16*11mm
3.Rib height:8mm
4.Rib distence:100-150mm
5.Sheet width:600mm
Rib lath for plaster ceiling
1.Product information:
Our rib lath for plaster ceiling is made from coils of sheet steel , slit and expanded into a herring bone pattern with metal ribs running about every 3 inches on the long direction of the sheet . This product is typically stapled ,nailed or screw applied to the substrate .It can also be tie wire attached to cold rolled grillage .
2.Feature:
(1)Minimizing the Space to install
(2)Excellence of Finished-work (plastering and tiling)
(3)Quality Improvement of Concrete
(4)Reduction of Wasted materials
(5)Improving the site safety
3.Usage:
(1)High and low level residential strips, firewall;
(2)Permanent factory building external walls, enclosure;
(3)Moisture-proof compound wall of basement.
(4)Landscape sculpture, and other special engineering;
(5)Slope protection, earth embankment engineering, etc.
4.Specification:
| Rib lath for plaster ceiling | |||||
| Thickness (mm) | Aperture(mm) | Rib height(mm) | Rib distence (mm) | Weight kg/m² | Sheet width(mm) |
| 0.3 | 16X11 | 8 | 150 | 0.85 | 600 |
| 7X11 | 8 | 100 | 1.165 | 600 | |
| 0.35 | 16X11 | 8 | 150 | 1 | 600 |
| 7X11 | 8 | 100 | 1.36 | 600 | |
| 0.4 | 16X11 | 8 | 150 | 1.14 | 600 |
| 7X11 | 8 | 100 | 1.55 | 600 | |
5.Picture:
We specialize in manufacturing rib lath for plaster ceiling,with good quality and unbeatable price.Quality and service are our first priority,we effectively use technically advanced machinery equipment and the expertise of our work to deliver our rib lath for plaster ceiling products.Feel free to contact us if you have any other specious requirements,we assure of our best attention all the time.