Semiconductor laser area measurement detector

Specifications

Product overview

ZYT-CJ-200 model Laser detector uses laser to measure the phase comparison method. The Laser sensor transmits different frequencies visible laser beam, and receives the reflected laser return from the measured object. After compared the receive laser signal with the reference signal, using the micro processor calculates the corresponding phase shift that corresponding to the distance between objects. If the distance in the measurement range, the laser sensor outputs switch signal or level signal. Because the product can realize the characteristic of remote measurement and non-contact, the product is widely applied to detect in product line, location and mobile crane position alarm.

Product features

1. Mm level measurement accuracy
2. Continuous detection of a moving object
3. For high temperature/dusty environment
4. Precision-heavy-no need to reflect board
5. With regional test ,control system and numeration function

Product type

ZYT-CJ-200     

Working principle picture

Technical target

1.Measurement accuracy: ±2mm, Distance measuring range within 30m, ±2mm .

2.Resolution: 1mm .

3.Measured rate: 5Hz ---100Hz.

4.Laser divergence angle: 0.6mrad .

5.Work temperature: -10°C~50°C.( Cooling device can up to -25°C~100°C).

6.Storage temperature: -20°C~70°C.

7.Power waste: related to the working way, maintain the state of 0.4W, the measuring state 1W.

8.Power supply: 10~30 VDC/2A.

9.Data interface: RS232/RS422,Baud rate 2400-38400,Format 8n1(Fixed)
   Output: Output level 10~30 VDC

   Switch contact opening and closing, load capacity 24VDC/0.5A .

10.Analog output: 4~20mA,Load impedance≤500Ω. Precision±0.15%,Temperature drift:

     less than 50ppm/°C.

11.Safety class: DINEN60825-1 Standard,Laser level:2.

12.Wave length: 650nm .

13.Device for supporting the protective cover and bracket,Protection grade:IP65.

Working flow chart