5T Single Plate Lifting Clamp, Horizontal Lifting Clamp_Model Nr.: CN-WPDQ5
*This lifting clamp is suitable for safe lifting and trasporting sheet packs and single plates in horizontal position.
*Lifting clamp is used for hoisting steel plates up to hardness 37RC(345HB)
*It is manufactured by low-carbon high-quality alloy steel forging.
*The rated load refers to the clamp be used in pairs, to lift an included angle is when 60 degrees permits the hoisting up the maximum weight.
*The lifting clamp must be always used in pairs.
*To lift long steel plates must be lifting with a balance.
*Rated load capacity and size of jaw opening are clearly shown on lifting clamps.
*Each plate grip is subject to test load at 2 times rated load capacity.
*Don't overload to use.
*Please read owner's manual before using the clamp.
| Model Nr. | Rated Load Capacity(Ton) | Jaw Opening(mm) | Net.Weight(kg) |
| CN-WPDQ1 | 1 | 0-50 | 3 |
| CN-WPDQ2 | 2 | 0-60 | 5 |
| CN-WPDQ3.2 | 3.2 | 0-90 | 12 |
| CN-WPDQ5 | 5 | 0-120 | 17 |
| CN-WPDQ8 | 8 | 0-130 | 25 |
