Singflo new designed 600-1100GPH submersible water pump/12 volt bilge pump for Marine RV

Features & Benefits:

All-in-one pump & switch-No float switch required

Pump turns on when water level rises & shuts off when water is removed.

Will not pump oil-straight motor oil that enters the bilge will not turn the pump on.

Snap-off strainer for easy cleaning

Anti-fouling impeller

 

Application:

• Typically used in boat hulls / bilges
• Bait tanks
• Ponds, pools, spas
• Other applications where you have to remove water
• Note: These pumps are designed for intermittent use only,NOT designed for continuous use

How a bilge pump works

Automatic bilge pumps with Built-in switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. Bilge pumps are designed to exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe navigational conditions.

Technical data

Model	Flow Rate	Volts	Current	Head	Wire	Outlet Dia
YM-G600-12	600GPH	12V	2.5A	2.5M	100CM	19mm/3/4''
YM-G600-24	600GPH	24V	1.5A	2.5M	100CM	19mm/3/4''
YM-G750-12	750GPH	12V	3.0A	3.0M	100CM	19mm/3/4''
YM-G750-24	750GPH	24V	1.6A	3.0M	100CM	19mm/3/4''
YM-G1100-12	1100GPH	12V	3.8A	5.0M	100CM	29mm/1-1/8"
YM-G1100-24	1100GPH	24V	2.0A	5.0M	100CM	29mm/1-1/8"