Features:
Provide a smooth operating environment ensured by high-speed chart drawing
· Conforming to the latest IMO performance standards with Marine Equipment Directive (MED) certification.
· Ensuring intuitive and easy-to-use display and operation performance reflecting professional user’s voices.
· Integrating route editing and route safety checking to support safer route plans.
· Delivered with a software license allowing an expansion tailored to each operational requirement for a wide variety of optional features.
· Providing the J-Marine Cloud service that collectively supports the updating of charts.
· ECDIS type-specific training (TST) is provided by a variety of organizations around the world on behalf of JRC.
Sophisticated user interface
The Electronic Chart Display and Information System (ECDIS) is a geographic information system for voyage planning and route monitoring to support the safety navigation of ships at sea.
The ECDIS onboard a ship uses images obtained from the automatic identification system (AIS), radar system, and collision avoidance target tracking (TT) system and superposes the images with navigational chart information, thus accurately displaying dynamic information on other ships around. Also the ECDIS plays central roles in the safe navigation of the ship and provides safety functions, including the generation of warnings when the ship approaches dangerous areas. The ECDIS is useful for marine accident avoidance and serves as equipment indispensable to the safe navigation of ships.
Mandatory installation of ECDIS
In response to the latest revision of the International Convention for the Safety of Life at Sea (SOLAS), the International Maritime Organization (IMO) enforced the mandatory installation of the ECDIS on oceangoing passenger ships with 500 gross tons or more and tankers and cargo ships with 3,000 gross tons or more in a stepwise manner in and after July 2012. This mandatory decision requires conventional paper charts or an additional ECDIS as a backup to the primary ECDIS if a ship uses the primary ECDIS as main navigational equipment. (Requirements for the equipment and operation qualification are subject to approval from the country with which the ship is registered and recommendations from the classification society of the ship.)
Regulations and major specifications
This equipment conforms to the requirements set out in the IMO’s resolution MSC.191 (79) for display-related voyage information adopted in December 2004 and the IMO Resolution MSC.232 (82) for ECDIS performance standards adopted in December 2006.
Other specifications of the ECDIS are shown below.
· Electronic chart display function/Radar overlay function : IEC 61174
· Display-related voyage information : IEC 62288
· Track control system (TCS) function *1 : IEC 62065
*1 Contact your JRC representative for supporting autopilot models.
Sophisticated user interface
The JAN-9201/7201 incorporates a new user interface (named jGUI) for an intuitive, easy-to-use, simple menu system based on the display of icons. This interface always displays critical data in fixed positions on the screen while icon-based menu display informs users of corresponding functions straightaway. Furthermore, target tracking (TT) and AIS symbols feature pop-up displays while mouseover on the target showing their main data at a glance.
Easy-to-use operating unit
The newly designed trackball supports all the operation of the equipment. Users will be alerted with alarms from the operating unit and color changes under situations that require attention.
Optional keyboard
The ECDIS will be operable like conventional models by connecting an optional operating unit that incorporates dedicated function buttons, control knobs and a full keyboard adopting the QWERTY layout.
Route editing and safety checking
JRC’s new ECDIS model JAN-9201/7201 has integrated route editing, which was conventionally divided into two segments, i.e., graphics input and numeric table input areas, into one. Waypoints, if specified, on a navigational chart are immediately quantified and added to the numeric editing table, and the numeric data on the waypoints that is input into the editing table is immediately reflected on the navigational chart. Up to four routes can be edited at the same time, and a portion cut out of any route can be combined and the routes can be all or partly replaced or edited.
Furthermore, a safety check on edited route data is possible with a click of a button. Detected error information items, if any, are listed and displayed, and the corresponding route portions are highlighted in the chart and table, which can be confirmed at a glance to take remedial measures.
Please send email to us for more details:
sales@malinsmarine.com
Product introduction
Malins Marine Service Co.,Ltd.
Was established in 2010 as a wholesaler and service provider of marine navigation & communication equipment.During the past years, the company has expanded by several folds in terms of size as well as business turnover.
The company started up in 2010 with one office and two persons and now has three offices and one warehouse, with working team of over 20 persons.As China continues to develop, Malins Marine is in a strong position not only to utilize the resources available domestically but also to introduce foreign shipyards and marine prodcuts to the ship owners and ship managers of China. Malins Marine collaborates closely with worldwide leading and specialized maritime equipment suppliers and manufacturers in order to provide our wide range of clients a full breadth of products and genuine spare parts as well.
With the support of a global network of well-known manufacturers, we are able to meet the growing & challenging demands of our customers from a sustainable development perspective.One-stop service for spare parts supplied and service, provide economic solution for ship owners & managers. To fully meet our customers’ requirements, we also specialise in navigation and communication systems, statutory annual radio surveys, annual performance tests as well as after-sales services. Our comprehensive line includes high quality electronics for navigation, communications, and safety & security applications. Over the years, we have built our service net covered China Coastal Port from north to south. Most of attending engineer trained by major makers and we owned genuine spare parts of kinds of makers in Shanghai head office.
Sales & Service
Sales navigation & communication equipment & spare parts
Service: installation/commission/repairing/calibration
Furuno, JRC, Sailor (Thrane&Thrane)- Cobham, Yokogawa, Tokimec (Tokyo Keiki), Raytheon Anschutz, Sperry, SAM Electronics, L3, Kelvin-Hughes, Mcmurdo, Jotron, Danelec, Samyung, Highlander, Headway, Rutter, Netwave, Simrad, JMC, Taiyo, STN Atlas, Cassens & Plath, C-plath, Teledyne, Consilium, Kongsberg, Samsung....
One-Stop Solutions, We care.
Web: www.marinepart.cn
Email: sales@malinsmarine.com