vacuum glass lifter glass mechanical arm with CE certification
Performance
1. Fangding pneumatic glass arm is used to load and unload heavy and hot glass easily. It is easy to carry and very safe and save many labor cost.
2. The max carring ability is 350-400KG.
3. The vacuum lifter is equipped with a buzzer and warning light units, in case of a power failure or vacuum leakage, an optical and an acoustic signal goes off immediately to warn the operator to do emergency operation.
4. Special safety appliance to aviod the electric break. If the electric is turn off suddenly, the glass will not fall down and damage the people.
5. The sucker is high temperature resistent with high quality and can add according to your request.
6. all the switches/alarm is equipped on the operaing plate and very easy to check the questions
The spare parts' parameters
Sequence No: | Name | Parameter |
1 | Column crane material | 32# Joist steel, Plug weld reinforced |
2 | The column steel size | 300mm |
3 | The steel thickness | 10-12mm |
4 | The Max lifting height | 1000mm |
5 | The Max transfer length | 6000mm |
6 | The electric block | 1000kgs/6M |
7 | The electric spare parts | ZHENGTAI or SIMENS |
8 | The column crane height | 5200mm |
9 | The Max angle of rotation: | 360degrees |
10 | The Max lifting weight | 350 KGS |
11 | The Column gross weight: | 650KGS |
Technical parameter of Vacuum sucker:
Name | Glass sucker |
Model | GFX-C |
Outside dimension | 78*62*80mm |
Max glass size | 80*35mm |
Function | Forward, roll over |
Weight limit | 400kg |
Our Factory
Our Exhibition