Delivery Time:7-10 working days
Certification:CE, ISO
Corrosion Proof Sectional Conveyor Belt Vulcanising Machine Compact Electrothermal Type
Production Description
Our belt vulcanizing machine is an electrothermal type vulcanizing device used for on-site bonding of
conveyor belts. With the advantages of advanced technology, compact structure and convenient usage,
it’s used for the vulcanized bonding of the belts mixed with canvas, nylon, steel cord, etc., and it’s also
suitable for the flame retarded, corrosion proof and other special belts.
The application area of this kind of vulcanizer is very wide, it can be used in metallurgy, mining, power
plant, port and wharf, building material factory, chemical factory and so on.
When order (please supply below information, our engineer will make a solution for you)
1. Max belt width
2. Heating platen length (or please supply belt manufacturer’s recommended splice length)
3. What kind of belt, light duty belts or heavy duty belts
4. Working Voltage
5. Pressure requirements
6. Degree of heating platen (standard will be 20 degree)
Technical Parameters
| Model | ADRS/DMYB HE1W13482-10 |
| Belt Width | 1800mm/70-72 inches |
| Voltage | 220V 380V 415V 660V 50HZ(Other voltages are also available) |
| Fast cooling time | 20 minutes (from 145 degrees down to 70 degrees or less) |
| Temperature raise (from normal temperature to 145℃) | no more than 25 minutes |
| The temperature difference of heating plate working surface | ±2°c |
| Temperature adjustment range | 0~200°c |
| Vulcanizing pressure | 1.0~1.4 MPa |
| Time of heat preservation | Usually 30mins |
| Degree of heating plate | 20°(rectangle other bias angle is also available) |
| Suitable for belt type | Common rubber conveyor belt and steel cord conveyor belt |
Specification
