Delivery Time:5 working days after received your payment
Certification:CE
GMR series Gasoline and diesel fuel oil small solenoid valve NC brass BSP 1/8
1. Specification
Pilot designed, low power, high pressure;
With IP65 coils, forged brass body;
Media:water,hot water,air,oil<20CST etc.;
Temperature:NBR:-5~80℃ EPDM:-10~130℃
VITON:-10~150℃
Pressure:0-10 bar
| Model | Pipe | Orifice Diameter(mm) |
Principium | CV | Body material |
Seal | Work Pressure |
| GMR-M02 | 1/8" | 1.5 | direct acting | 0.08 | Brass | NBR | 0-10bar |
| GMR-M03 | 1/8" 1/4" | 2.5 | 0.23 | NBR | 0-7bar | ||
| GMR-03 | M12*1.25 | 3 | 0.3 | NBR | 0-5bar |
| Pattern: | Two-port two-position |
| Principium: | direct acting type |
| Control mode: | normally close |
| Valve body: | brass |
| Diaphragm material: | NBR: ≤80°C ,FKM≤150°C |
| Working pressure: | 0~10bar |
| Max pressure: | 10bar |
| Voltage: | AC220V AC110V DC12V DC24V |
| Medium: | Air ,water ,Liquid ,oil ect. |
| Application: | Gas protection welder, various types of burners, test equipment small-flow air water control system |
2.Dimensions
Maintenance instructions:
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then through power debugging.
4. Please pay attention to dust, it is recommended to install the exhaust port or muffler muffler throttle.
5. When connecting pipe, pay attention to only release the strap around the joint may not exceed the end face of the tooth, and pay attention to the elimination of pipe fittings, metal particles inside the pipe, dust and oil, etc
