Specifications
1) resin sand casting.2) Imported ball screw
3) Spindle speed : 8000 RPM.
(4) Taiwan production pressure cylinder
Main configuration:
1) resin sand casting.
2) Imported ball screw (Taiwan YinTai ,Taiwan silver, GermanyIF, SpainBSG, Britain HPS) and precision lock nut (Taiwan Yingxi)
3) the main shaft and main motor pulley and belt
Spindle standard rotate speed : 8000 RPM.(TOM - 545 optional BT40 /φ120 spindle;
(4) Taiwan production pressure cylinder
5) Paint: according to customer's requirement (swatches) configuration, spray paint color.
6) Screw special import bearings, (NSK, FAG, NTN).
7) import couplings (R + W).
(8) The X, Y, Z) stainless steel rail protection (Taiwan and vibration, Shanghai fly), including and TOM TOM - 1060-1060 - Z to guard for protection.
9) Domestic electric lubrication system (solar corona, becky).
10) Domestic cooling water system (no: water pump, water tank, etc.).
11) A domestic air cooling pipeline (not: air compressor, oil water separator).
12) The spindle box body balance system can choose heavy hammer or nitrogen balance system; TOM - DZ2010 for nitrogen balance system.
13) TOM - 1060 and above models optional gear milling head, belong to special order.
14) New TOM series design has spiral chip removal slot (excluding spiral chip removal device)
model unit:mm | TOM-545 (Rear motor) |
Dimension of worktable surface | 380*620 |
Right and left stroke (X) | 500 |
Back and front stroke (Y) | 400 |
Vertical stroke (Z) | 455 |
distance from Spindle center to column guide rail | 460 |
distance from the spindle end to the work surface | 45-500 |
T-groove working surface(Quantity -size *interval) | 3-16*110 |
Taper of hole in spindle(type/ installation dimension) | BT30/ Ø120 |
Spindle speed(rpm) | 8000 |
X , y axis ball screw specifications | 3205 |
Z axis ball screw specifications | 3205 |
X.Y.Z motor connection way |
|
Recommended to choose main motor parameters(Out power KW) | 3.5 |
Choose the XYZ to motor parameters(≥torque NM) | 6,6,6 |
Guide way cover stent length(X,Y,Z) | 365,200,165 |
Lathe bed pad height | 20 |
Max load capacity | 250 Kg |
machine net weight | 2.5t |
Notes | "People" shaped column |
Notes:Standard:
1 spindle spindle speed is 8000 RPM, 10000 RPM, 12000 RPM, 15000 RPM spindle belong to special order, when placing order, please indicate special).
2 based on spindle center , about the type spary water modles and the ring spray water model, spindle and the spindle motor straight league, belonging to special order, special when placing order, please indicate.
3.Three phase motor must according to the parameter selection, or the consequences customers should solve by yourself
4. company can research and improve product at any time, so we have the right to keep change machine technical parameters s without prior notice. hope you can understand!
