Overview
With the rapid development of hydraulic industry technology, hydraulic technology tends to high pressure, high precision and high power. At the same time, it puts forward higher requirements for the reliability of hydraulic system. 70% of the faults in the hydraulic system are caused by oil pollution, and 60% of the pollution comes from new oil, 20% of the pollution caused by the parts of the system in the course of work, and 20% of the pollution caused by other causes. For this reason, the cleanliness of the oil with servo parts and other precision components in the hydraulic system is strictly controlled internationally, and the cleanliness of the new oil added is required to reach level 5 of GJB420 (equivalent to the American Aerospace Standard NAS1638) to ensure the stable and reliable operation of the system. However, sampling and analysis from domestic hydraulic oil barrels shows that the cleanliness of domestic new oil is generally only 10-11 of that of GJB420 (NAS1638). If the new oil with such serious pollution is used without strict filtration and purification, it will bring serious harm to the life and reliability of the precision components of the whole system.
To sum up, in order to adapt to the development of hydraulic technology, our company has developed a multi-function and high viscosity oil filter on the basis of giving full play to the production of various high-precision filter technologies. It is suitable for the use of all advanced hydraulic equipment at home and abroad, and it is an advanced oil filter at home at present.
Characteristics
The oil filter includes a special motor driven by a motor, a gear pump, a heater, an electric control box, etc.
Gear pump has the characteristics of low noise, strong self-priming capacity, smooth operation and so on.
The high pressure pipeline is equipped with overflow protection device, which can effectively protect the safety of the hydraulic system.
Thermal relay protection is used to prevent motor damage caused by motor overload.
The coarse filter at the suction port protects the oil pump and prolongs the service life of the main filter.
The fine filter can choose different precision according to the different needs of users to achieve the desired results.
The oil filter shell adopts quick opening structure, which can quickly open the upper cover and replace the filter element without any tools. A pressure gauge is installed on the panel, which continuously indicates the operation status of the system and the pollution degree of the filter element when working.
The heater and electric control box are added to filter the oil with high viscosity. On the basis of ensuring that the properties of the oil products will not be destroyed, the fluidity of the oil products is mentioned, and the filtration efficiency of the oil filter is increased.
Application:
Filtration of hydraulic Lubrication system during refueling.
Bypass Filtration of hydraulic Lubrication system.
Circulating Filtration before hydraulic Lubrication system is put into Operation.
The oil of the hydraulic lubrication system is pumped out without being filtered by the pump of the equipment itself.
(note: this machine is not suitable for flammable and explosive media such as fuel)
●Filtration of hydraulic Lubrication system during refueling.
●Bypass Filtration of hydraulic Lubrication system.
●Circulating Filtration before hydraulic Lubrication system is put into Operation.
●The oil of the hydraulic lubrication system is pumped out without being filtered by the pump of the equipment itself.
(Note: this machine is not suitable for flammable and explosive media such as fuel)
1. Technical parameters
Pressure: rated pressure 0.6MPa.
Traffic: 32L/min.
Medium: 160mm/s (20 ℃).
Accuracy: 40 μ m.
Rated power: 1.1KW.
Power supply voltage: 220V.
Frequency:50HZ.
Operating temperature: ≤ 1000C
Contact:
Ada wang
filtersales03@le-filter.com
whatapp: 0086 18695927657