75% Oil Yield Rate Waste Plastic Pyrolysis Machine Equipment By Shangqiu Sihai

 

Brief introduction

This plant can handle 5-7tons of raw material per 24 hours, the output of crude oil is 40-43%, carbon black 37%, steel 13%, Plastic 75% . the residue is waters.

 

Materials that can deal with

 waste plastics, waste rubber type of various products.

Liquid oil  such as  waste engine oil, waste oil and other waste washed pieces of oil.

Semi-solid: waste oil, diesel and other semi-underground storage of waste oil 2 flows

 

configuration of the plants

Plant unit	Name	Specification	Quantity
Host	Main furnace	2200*5100	1set
	Base of the furnace shell insulation		1set
Condensation, Desulfurizati-on  & dust removal system	Row-tube condensing system		1set
	Oil – water separator		1set
	Desulfurization and Dust removal		1set
	Fan		1 set
	Reducer	3KW	2sets
	Oil – gas exclusion		1set
	Stream tower		1set
	Water seal		1set
	Water pump	2.2KW	2set
	Water pump	1.5KW	1set
	Heavy oil storage tanker		1set
	Residue oil tanker		1set
	Damper		1set
	Chimney		1 set
External accessories	Steel, channel steel, gas gun, falanges,blind plates
	Pipe valves, screws, compensator, sealed body

 

Working process Of pyrolysis plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

 Land requirement: 10M*30M(300meter square) is needed to install the pyrolysis unit

This equipment only needs 2 or 3 people to operate it.

 Delivery time: around 20 days

 Payment terms : T/T. 30% advanced; 70% before shipping

 

Picture of machinery: