Product Description
Vertical machining center VMC850P main features:
1. High rigidity + heavy cutting:
High-rigidity design of the bed, servo, spindle, etc., enhance the extreme heavy cutting ability;
Good heavy cutting ability in plane milling, boring, drilling and tapping;
Add machine tool accessories to increase monitoring and reduce the probability of failure;
Regional service mode of sales service personnel, quick response and quick repair;
According to statistics, the failure rate of 850P is 50% lower than that of 850L, and the failure rate of 850P per month is less than 1% (number of maintenance machines in the month/number of machines in warranty);
2. High cost performance + value-added services:
On the basis of ensuring the performance of the machine tool, adopt a cost-effective design concept to benefit customers;
Process development capability: Have its own process team, which can provide workpiece proofing and realize turnkey projects.
Specification | Unit | VMC850P |
Worktable size | mm | 1000*500 |
T-slot size | mm | 5-18*100 |
Max. loading of worktable | kg | 600 |
3 axis Travel X/Y/Z | mm | 850/500/550 |
Distance from column to spindle center | mm | 582 |
Distance from table surface to spindle nose | mm | 100-650 |
Spindle hole taper | BT40 | |
Spindle power | kw | 11/15 |
Max. spindle speed | rpm | 8000 |
Max. feed speed | mm/min | 12000 |
Rapid feed speed | m/min | 48/48/32 |
Tool magazine capacity | T | 24 |
Tool change time | S | 2.5 |
Positioning accuracy | mm | 0.008 |
Re-positioning accuracy | mm | 0.004 |
Machine dimension | mm | 2460*2355*2860 |
Machine weight | kg | 5500 |
Standard Equipment:
1) with complete machine cover
2) Disc type ATC: 24 pcs tools
3) Taiwan KENTURN brand BT40 Spindle, spindle speed=80-8000rpm
4) Taiwan PMI X/Y/Z linear guideway, ballscrew
5) Taiwan PMI ballsacew
Optional Equipment:
1) GSK218M controlelr
2) Siemens 828D controller
3) Fanuc Oi MF(5) β controller
4) Spindle oil cooler
5) Auto chip conveyor
6) Tool measruring device
Detailed Images
1. One-piece bed, C-shaped structure, Z-axis without counterweight; The whole machine is 5.5 tons, the fixed parts are heavy-weight design, and the moving parts are light-weight design;
2. Reinforced rib structure design, light weight, while improving rigidity;
3. Self-made bed, Okuma pentahedron machining equipment, gray cast iron, artificial aging in the factory;
4. Assembly line, manual scraping of the bonding surface;
5. 8 feet, the whole surface is attached, the new model is redesigned-three-point contact;
6. The sheet metal is 2mm, and it is assembled by double-sided fastening to reduce the possibility of seam water seepage.
1. The contact ratio of headstock and column is improved,Improve the rigidity of the spindle box during processing;
2. The span between the column and the bed is improved,The column tilt is the lowest during processing;
3. Labyrinth protection design,Avoid the entry of iron filings and cutting fluid.
Screw type:
Ball Brand: PMI/THK/HIWIN, accuracy class C3;
Specification: 4016;
Installation form: fixed-fixed;
Designed rapid traverse speed: 48m/48m/32m;
1. Coupling type: diaphragm;
Brand: Miki;
2. Bearing Brand: NTN;
Type: Angular Contact Thrust Ball Bearing;
Specification: 3062;
Arrangement: Top Three.
3. Guide rail: linear rail (ball);
specification: 35/45/45;
brand: THK/PMI/HIWIN;
number of sliders: 2/single rail.
4. Screw bearing lubrication method: adopts thin oil lubrication method to improve the content:
1) improve heat dissipation efficiency;
2) grease is not easy to replace;
3) mixed corrosion of water, oil, and grease;
4) different requirements for lubricating viscosity.
Spindle adopts: Taiwan ROYAL/VYUCHENG/KENTURN, Standard 8000 revolutions;
1. Belt drive, dynamic balance on the factory V1 line; Standard BT40 tool holder;
2. The spindle adopts high rigidity and short nose design;
3. Increased axial rigidity, heavy cutting, reduced vibration of circumferential milling tools, and improved machining quality;
4. The main shaft adopts the ring spray mode, and the central water outlet main shaft is optional.
1.Taiwan POJU/OKADA, disc manipulator tool magazine, 24T; According to customer needs, we will choose tool magazine with protection device;
2. The force of the tool magazine directly reaches the base, and the column does not bear the lateral bending force;
3. The tool change mechanism is equipped with an air tank to ensure sufficient air pressure for one tool change.
1. Side-discharge water tank, front flushing, high-pressure water gun design, shorten the cleaning auxiliary time and reduce labor costs;
2. Improve the oil-water treatment structure to extend the life of the cutting fluid and reduce the cost of auxiliary materials.
Saiyo panel, Schneider Electric:
1. The I/O part of the machine tool adopts the printed circuit board and the CNC control part;
Degree of integration, greatly reducing the failure rate;
2. The wiring is neat and the structure is reasonable;
3. The standard configuration is a heat exchanger: Tongfei (MEA-25N-01-1227);
4. Optional air conditioning: Tongfei (MCA-03H-01-1227).
Company Profile
Professional Service
FAQ
Q1: How is the warranty?
A1: Warranty time is 13 months after BL date.
Q2: Can we visit your factory before order?
A2: Sure.All new and old friends are welcomed to visit us at our factory. Besides, we can pick up you at the station or airport if needed. We will be very honored to help with tickets and accommodation booking.
Q3: Do you have a stock?
A3: Sorry, most of our machines don’t have stock, we always produce according to order. However, if during fairs months, maybe have few samples back from fairs.
Q4: What’s the MOQ?
A4: One set only.
Q5: How about your quality?
A5: We have approved the ISO9001:2008 Quality management system.ISO14001 Environmental management system, OHSAS18001 International occupational health and safety management system, and Social Accountability 8000(SA8000). Most products have been approved by the European and American safety standards, including CE, GS, EMS&UL,90% of our products are exported to more than 60 countries and regions around the world, especially to Europe and America market and always win high reputation. So you can rest assured of our quality products and our best services.
Q6: Do you have professional engineers?
A6: Yes.we have professional engineers and designers. We can provide OEM services.
Q7: Can you provide customized machines?
A7: Yes, we can design and manufacture according to your specific requirements.
