Low cost 5 -axis vertical CNC gantry type machining center TOM-SP2503
Low cost 5 -axis vertical CNC gantry type machining center TOM-SP2503
CNC Gantry Machine Center TY-SP2503
1.Brand:HHT
2.Cert.:ISO,CE
3.Max.load:10000kg
4.Table size:2300*3000mm
5.X/Y/Z travel:3000/2700/1000mm
6.CNC controller:SIEMENS FANUC MITSUBISHI
Specification of CNC Gantry Machine Center TY-SP2503:
Specifications
| Specifications | |||||
| Item Model | Unit | TOM-SP2503 | TOM-SP2503B | TOM-SP2504B | TOM-SP2505B |
| table size(LxW) | mm | 2300×3000 | 2300×3000 | 2300×4000 | 2300×5000 |
| X-axis travel | mm | 3000 | 3000 | 4000 | 5000 |
| Y-axis travel | mm | 2700 | |||
| Z-axis travel | mm | 1000 | |||
| distance between columns | mm | 2700 | |||
| spindle nose to table | mm | 280~1280 | |||
| table-T-slot | mm | 11-28×200 | |||
| spindle taper | mm | BT50/Φ190 | |||
| spindle gear | rpm | highest speed 3000rpm | |||
| spindle straight transfer | rpm | highest speed4500rpm(ZF speed reducer can be added,reduction ratio 1 to 1, 4 to1) | |||
| spindle belt drive milling head | rpm | highest speed6000rpm,reduction ratio1.5 to 1 or 1 to 1(ZF speed reducer can be added,reduction ratio1 to 1, 4 to1) | |||
| XYZ-axis ball-screw size | mm | 8016x6316x5010 | |||
| X-axis rail size | mm | harden rail | heavy duty roller liner guide 55 | ||
| Y-axis rail size | mm | heavy duty roller liner guide 55 | |||
| Z-axis rail size | mm | rectangle slide rail | |||
| X/Y/Z axis rapid feed | m/min | 12x20x20 | |||
| three axis working rapid speed | mm/min | 1-8000 | |||
| positioning accuracy | mm | ±0.015 | ±0.02 | ±0.02 | |
| repeat positioning accuracy | mm | ±0.003 | ±0.005 | ±0.01 | |
| control system | M70A | MITSUBISHI-M70A | |||
| spindle motor | kw | 30 | |||
| X-axis servo-actuator | nm | 60 | 40 | 70 | 100 |
| Y-axis servo-actuator | nm | 40 | |||
| Z-axis servo-actuator | nm | 40 | |||
| pneumatic source requirement | Kg/Cm2 | 6 | |||
| table load capacity | kgs | 10 | 8 | 12 | 15 |
| power requests | kva | 50 | 50 | 50 | 50 |
| weight(approx) | kgs | 44.5 | 44.5 | 49 | 55 |
| Standard accessaries | Special accessaries | ||||
| 1,full closed guard(without top cover) | 1, deep honing Oil-way tools device | ||||
| 2,column postposition carrier | 2,CNC rotatry table | ||||
| 3,Double oil hydraulic cylinder balance system | 3,Electrical box air-conditioning device | ||||
| 4,Oil-water separator | 4,Optical Scale ffedback system | ||||
| 5,Cutting fluid cooling system | 5,High pressure spindle center of the water | ||||
| 6,Double spirals type chip conveyer | 6,Cutting fluid automatic system | ||||
| 7,Crawler type chip removal/ debris collector car | 7,Automatic tool length measurement systems | ||||
| 8,Working light and daylightlamp | 8,Automatic work-piece measurement systems | ||||
| 9,process end warning light | 9,oil-pressure clamping maunal 90°lateral milling head | ||||
| 10,water cannons and air gun for cleaning | 10,oil-pressure clamping maunal 90°lateral milling head | ||||
| 11,Rigid tapping | 11,lengthening milling head | ||||
| 12,RS232C port | 12,gear type milling head | ||||
| 13,Portable hand wheel | 13,milling head with five faces | ||||
| 14,Spindle cooling system | 14,Erect milling head | ||||
| 15,Electrical box heat exchanger | 15,manual Universal milling head | ||||
| 16,foundation pad and balance adjustment pad | 16,straight transfer milling head | ||||
| 17,One set of tool and adjustment box | 17,ZF speed reducer+straight transfer milling head | ||||
| 18,Operation and maintenance instructions | |||||
| 19,automatic power turn-off device | |||||
| 20,precision check report | |||||
| 21,System Operation and maintenance instructions | |||||
| 22,Outside varying voltage(220/380V) | |||||
| 23,Manual/program spindle debris device | |||||
| 24,Central lubricating system | |||||
Machine Photo
Products are dismantled into different parts, coated with rust-proof paint and wrapped with a plastic cover. The parts will be put into fumigated wooden cases and loaded into containers as planned. Inside the container, the parts will be fastened with iron cable.
1. Free installation and debugging
2. Free operator training
3. Free maintenance within 1 year
4. Long warranty and technology support
Huaian Haoyang Machinery CO., LTD., located in Jiangsu, one of the most developed province of China. We are an industry and combination enterprise with several years’ development. Haoyang has gained its position of prominence over the years in the field of CNC Machining Center, CNC Lathe Machine, Boring and Milling Machines for large size components. Haoyang boring and milling machines can be used in the fields like energy, aerospace, shipbuilding, diesel engine, defense, earthmoving and general mechanics.
We have already passed the ISO9001 and CE authentication. The trade part is the agent of CNC machines like boring machine, CNC Milling Machine, CNC lathe, machining centers and so on. They are well known for their strength, construction, durability, low maintenance cost and ease of operation.
We do business with sincerity and honesty, and welcome anyone who wants to establish business relationship with us.
If any products are of your interests, please do not hesitate to call us. Or contact at Skype: jianhai2012