VDL600 Vertical Machining Center
to: export(at)longlife-machinery(dot)com
Standard Configuration
spindle speed 8000rpm(Dalian, Huazhong/802C SYSTEM:6000rpm), BT40, X / Y /Z-axis linear guide way, Tool magazine capacity type:
12/drum (VDL500)
16/drum (VDL600A)
National Inspection-free Products;
Specifications | Unit | VDL500 | VDL600A |
Table(L×W) | mm | 700×320 | 800×420 |
T-slot(Numbers×Width×Distance)(b/t slots) | mm | 3×14×110 | 3×18×125 |
Max. Table load | kg | 150 | 500 |
The distance from spindle center line to column guide way surface | mm | 430 | 511 |
The distance from spindle nose end face to table upper surface | mm | 140~520 | 150~670 |
X/Y/Z travel | mm | 450/350/380 | 600/420/520 |
X/Y/Z guide way type |
| Linear way | Linear way |
X/Y/Z rapid traverse speed | m/min | 30/30/30 | 24/24/20 |
Feed rate | mm/min | 1~10000 | 1~10000 |
X/Y/Z servo motor power | kW | 1.4/1.4/1.6 (1.2/1.2/1.8) ( 2.85/2.85/2.85) | 3/3/3 (1.2/1.2/1.8) (1.8/1.8/2.5) |
X/Y/Z servo motor torque | N.m | 7/7/7 | 11/11/11 |
Positioning accuracy | mm | 0.016 | X/Z:0.020 Y:0.016 |
Repeat positioning accuracy | Nm | 0.006 | X/Z:0.008 Y:0.006 |
Spindle motor power | kW | 3.7/5.5 | 7.5/11 |
Spindle speed range | r/min | 60~10000 | 60~8000 |
Spindle taper |
| #40(7/24) | #40(7/24) |
Tool magazine capacity/Type |
| 12/drum | 16/drum |
Tool adaptor type |
| BT40 | BT40 |
Max. Tool weight | kg | 6 | 7 |
Max. Tool diameter/length | mm | 80/200 drum | 100/280 drum 77/280 swing arm |
Time of tool change(T-T) | sec | 6~8 | 6~8/3.5 |
Air pressure requirement | MPa | 0.6 | 0.6 |
Power requirement | kW | 15 | 25 |
Overall dimension(L×W×H) | mm | 2450×1590×2200 | 2310×2040×2337 |
Net weight | kg | 2000 | 4800 |
Tel:+86 -15641121240/15641121140
Fax:+86-411-84410129