Specifications
Aluminum lids stock1)approved by ISO9001:2008
2)width:0.15-0.3mm
3)Short delivering time
aluminium lids stock
Introduction the aluminum cap stock:
Alloy | Temper | Specification (mm) | ||||
Thickness | Width | Sheet Length | ||||
Sheet | Strip | |||||
8011 5052 5182 | H14, H24, H16, H26 | 0.16~0.23 | 500~1300 | 50~1300 | 500~1500 | 75, 150, 300, 350, 505 |
Remark: special specifications can be produced accordingly to your requirement. | ||||||
I Chemical Composition | |||||||||||
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | |
each | Total | ||||||||||
8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | - | 0.1 | 0.08 | 0.05 | 0.15 |
II Tolerance | |||
C | Width | Length | Diagonal |
±0.005mm | ±0.05mm | ±0.05mm | less than 1mm |
Mechanical Property for Continuous Casting
Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) |
8011 | H14 | 0.16~0.23 | 185~205 | more than 2 |
Mechanical Property for Direct Casting
Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) |
8011 | H14 | 0.16~0.23 | 125~155 | more than 2 |
The Production Process:
Ingot/Master Alloys --- Melting Furnace – Holding Furnace --- D.C. Caster --- Slab ---- Scalper --- Hot Rolling Mill – Cold Rolling Mill – Punching – Annealing Furnace -- Final Inspection – Packing --- Delivery
1. How can I get some samples?
1) We are honored to offer you samples. New clients are expected to pay for the courier cost. The samples are free for you; this charge will be deducted from the payment for formal order.
2) Regarding the courier cost: you can arrange a RPI (remote pick-up) service upon Fedex, UPS, DHL, TNT, etc. to have the samples collected; or inform us your DHL collection account. Then you can pay the freight direct to your local carrier company.
2. Are you a manufacture?
Yes, we are. We have our own factory in Gongyi Henan China, as manufacture our customers are welcomed to visit our factory.
3. Do you have any certificates?
Our products passed inspection of SGS, DNV, CE
Quality is priority! Every worker keeps the QC from the very beginning to the very end, Quality control department especially responsible for quality checking in each process.
Our certification:
Product List:
Main products include aluminum sheet, coil, plate. and foil in alloys of 1***,3***,4***,5***,6***,7***,8***. Especially 3003, 5005, 5052, 5083, 5182, 5754, 6061,6063, 8011 etc. Hot rolled plate, ultra wide, ultra thick plate are our advantages.
Henan Winow Import & Export Co.,Ltd belongs to Wanda Aluminum Co.,Ltd, mainly promotes foreign trade and is responsible for products’ export. Aluminium sheet, foil, coil, strip are our mainly export products.