Specifications
1.Diameter :38mm2.HDPE bottle caps
3.Easy to be pierced through and place it into the water dispenser with the water bottle
Appearance conforms with these requirments:
item | standard |
product surface | product should be full,competely structure, surface and inside is smooth, without apparent shrinkage, bubble and defect |
color | color equably |
pollution | no dust, no plastic scrap or other impurities, no obvious odor |
trademark | logo mode & number are full, legible |
Singel stick labels quality subjects to the follwing requirements:
item | reqirement |
printing | single stick label should have right pattern,colors and fonts, good printing quality no obvious show besmirch,no noise and no defects. |
Seal cutting | After cutting ,the single stick labels edge is smooth, no flash and silk glue. After cutting, geometry center is on the center and the deviation error less than 2mm.The label on the center of 38mm Smart Plastic Screw Bottle Cap. The deviation between label and caps center diameter error is not more than 2mm |
Heat sealing | heat sealing evenly, level off, without apparent ruffle, become warped edge, Stick label and 38mm Smart Plastic Screw Bottle Cap heat sealing are strength.when taking off label,the label area remains on the cap no more than 50mm2 and not more than three areas, the largest area does not exceed 300mm2. |
Thermal stability | A. resistance to low temperature,the label not appear warped edge,roll edge and loose. B. resistance to high-temperature,the label not appear warped edge,roll edge and loose. |
2400 UNITS/CTN
192,000PCS/1x20'CTN, 460,000PCS/ 1x40'High Cube CTN