Excellent deviation stability Analog 0-5V Output Vibration Accelerometer Sensor For Various Industry Using
Key Features
- Three axis measurement optional (X,Y,Z)
- Output signal:0-5V
- Voltage supply:9-36V
- Shock resistance:2000G
- Measuring range optional:±01G;±02G;±04G;±08G;±16G;±32G;±40G
- Excellent deviation stability
- Good environment performance shock,vibration and temperature)
- Size:L47×W47×H38mm
- Weight:100g
- Working temperature:-40°C to +85°C
- Storage temperature:-55°C to +100°C
Application
- Crash records, fatigue monitoring and forecasting
- Traffic system monitoring, the roadbed analysis and high-speed railway fault detection
- Military and civilian flight simulator
- The shipboard satellite tracking system
- Low frequency vibration and automatic monitoring
Parameters
Measuring range | ±2 | ±08 | ±40 | g |
Deviation calibration | <10 | <50 | <150 | mg |
48h deviation stability | 0.5 | <1 | <2 | mg Typical value |
Meausring Axis | X,Y,Z | X,Y,Z | X,Y,Z | Axis |
Annual deviation stability[2] | 1.5 (<5) | 7.5 (<25) | 22 (<75) | mg Typical value(Maximum value) |
Power on/off repeatability | <2 | <10 | <20 | mg(Maximum value) |
Deviation temperature coefficient[3] | 0.1 | 0.5 | 1.5 | mg/℃ Typical value |
| ±0.4 | ±2 | ±6 | mg/℃ maximum value |
Annual scale factor stability | 300 (< 1000) | 300 (< 1000) | 300 (< 1000) | ppm Typical value |
Scale factor temperature coefficient | 100 | 100 | 100 | ppm/℃(Typical value) |
| -50 / 250 | -50 / 250 | -50 / 250 | (Minimum/Maximum value) |
Resolution/threshold (@ 1Hz) | < 1 | < 5 | < 15 | mg(Maximum value) |
Nonlinearity | <0.1 | <0.5 | <0.6 | % FS(Maximum value) |
| <0.02 | <0.09 | <0.27 | g(Maximum value) |
Bandwidth[4 ] | 1~≥400 | 1~≥400 | 1~≥400 | Hz |
Resonance frequency | 1.6 | 6.7 | 6.7 | kHz |
Operating temperature | -40°C to +85°C | |||
Reliability | MIL-HDBK-217,Grade two | |||
Shock resistance | 100g@11ms,3Times/Axis(half sinusoid) | |||
Recovery time | <1ms(1000g, 1/2 sin 1ms, impact in I shaft) | |||
Vibration | 20g rms,20~2000Hz (Random noise,o ,p,I each shaft effect 30 minutes) | |||
LCC sealed | Meet MIL-STD-833-E | |||
Input(VDD_VSS) | 9-36 VDC. | |||
Output voltage range | 0~5 VDC @12VDC Input voltage( 0 g as 2.5V±10mV) | |||
Operating current consumption | <3mA @ 12 VDC | |||
Weight | Typical value:100g | |||
Size | Typical value : L50×W50×H38mm, |
Our Company & Workshop View :
Certificates & Honors :