The bright selling point is the bump sensors, pressure sensors and lift sensors which are fasten on a rocking bar.
A subarea setting function could separate a big area into 3 small areas at most.
With this kind of high cutting efficient setting, it saves much time of robot running at same place, to cut a big lawn with least time.
Functions:
1.Lift sensor
2.Tilt sensor
3.Ultrasonic sensor
4.Bump sensor
5.Rain sensor
6.Touch sensor
7.Wireless remote controller
8.Mowing schedule
9.Anti-theft
10.Cutting height easy adjustable
11.Auto recharge
12.Emergency stop switch
13.Pressure sensor
14.Overload protect
15.Waterproof
16.LCD display
17.Electronic compass
18.Subarea setting
19.Different languages selection
1. Ultrasonic sensors:
Their mowers only have bump sensors, that means they need to bump obstacles to change a new direction.
S510 has ultrasonic sensors, it could avoid obstacles before the robot bump them. It's more safe. What's more,S510 also have bump sensors, in case ultrasonic sensors are malfunctioned.
2. Touch sensors:
Their mowers don't have touch sensor function.
Our S510 have TOUCH sensor localed on the handle. If anyone don't familiar with this robot try operate the robot from Handle during it is working, the robot stops working within 0.5 seconds. It's also a safety function.
3.Pressure sensor
The pressure sensor located on the top cover, if a kid sits on the mower, it stops working within 1 second.
4. Electric compass
S510 have compass function. It could helps the robot works good on a slope lawn.
5.Advance software
If there has obstacles put on virtual wire, the competitor's robot can't avoid it just keep walking forward. Ours could avoid it and get back to virtual wire again.
6. Brushless cutting motor
It's with longer use lift compare with the brush motor, the brushless motor with lower noise.
7. use the best spareparts
We use Samsung lithium battery.
8.easy navigation panel
User can operate from the easy control panel, like set working schedule, choose language, set password...
9.software upgrade available
There is insert connector under the bottom base, user can use the usb connect the computer and mower, then update accordingly.
10.cutting height easy change
User can adjust the cutting height just by rotating the knob under the shell, no need to change blade any more.
11.Safety protection, errors automatically alarm
The mower will alarm when something is wrong, the display will show the problem accordingly.
12.Subarea setting
In a large lawn, user can separate the lawn into at most three parts and set working schedule in each area, which increase the mowing efficiency.
1.100m wire
2.100pcs pegs
3.Blade 1pc
4.Stake 4pcs
5.Charger 1pc
6.Charging station
7.Wire connector 10pcs
8.Inner hexagon spanner 1pc
9.User manual
The robot lawn mower has two work mode:
1.Auto mode: let the mower work automatically, enjoy your time with your family!
2.Manual mode: operate through remote control
Four steps to safely start the mower:
-1.Connect charging station with power supply by charger, and make sure the recharging light is in green color.
-2.Connect virtual wire to charging station, and make sure it is in good connecting(virtual wire light in colorless).
-3.Turn on the power button and release the emergency switch.
-4.Input password if selected and select mode.
Let robot mower do the grass cutting for you!