LCK60 high speed cnc vertical turning lathe
Such high speed cnc vertical turning lathe has following features:
1. This machine is mainly suitable to machine such auto parts as drum brake, hub, decelerator and so on,
2. also it can be used for soft turning and hard turning for bearings to replace grinding.
3. It is easy to install kinds of special-purpose clamps for complex shell-parts and abnormal parts.
4. Kinds of CNC controllers for your choice, such as Fanuc, Siemens and so on.
LCK60 high speed cnc vertical turning lathe's technical data
Specifications | Unit | Parameter |
|
Max. swing diameter | mm | 780 | 1000 |
Max. turning height | mm | 700 | 800 |
Max. table diameter | mm | 600 | 800 |
Max. weight of workpiece | t | 3.2 | 5 |
Spindle nose |
| A2-11 | A2-15 |
Spindle speed | rpm | 50~1000 | 50~800 |
Max. output torque of spindle | Nm | 840(high-rigidity) | 1900(high-rigidity) |
Main motor power(30/min continuous) | kW | 26/22(FANUC) | 45/37(main motor CTB4037) |
Chuck | mm | Φ510 | Φ630 |
Rapid transverse speed of X-axis | m/min | Rolling guide 10 | Rolling guide 10 |
Rapid transverse speed of Z-axis | m/min | Rolling guide 15 | Rolling guide 12 |
Travel of X-axis | mm | 620 | 800 |
Travel of Z-axis | mm | 700 | 850 |
Turret |
| Vertical 6-position | Vertical 5-position |
Cutter size | mm | Excircle cutter 32x32 Boring cutter arbor dia. Φ50,Φ40,Φ32 | Excircle cutter 32x32 Boring cutter arbor dia. Φ50,Φ40,Φ32 |
Whether to use cutter nearby |
| yes | yes |
Machine weight | kgs | 12000 | 15000 |
Machine size | mm | 3640×2510×3438 | 3490x2795x3671 |
No | Item | National Standard | Actual by factory |
1 | Roundness of workpiece | 0.007/Ø120 | 0.005/Ø120 |
2 | Cylindricity of workpiece | 0.012/Ø120×150 | 0.010/Ø120×150 |
3 | Flatness of workpiece | 0.03/Ø500 | 0.02/Ø500 |
4 | Positioning accuracy X-axis | 0.035 | 0.018 |
5 | Positioning accuracy Z-axis | 0.040 | 0.020 |
6 | Repeated positioning accuracy X-axis | 0.0075 | 0.006 |
7 | Repeated positioning accuracy Z-axis | 0.015 | 0.008 |
8 | Machining accuracy | IT6-IT7 | IT6-IT7 |
9 | Roughness of workpiece | Ra1.6μm | Ra1.6μm |