Maka 2 in 1 Wall Detector with Laser Distance Meter Stud Finder
1. This instrument can detect metals (steel bar, copper pipe) and cables hidden in walls, ceilings and floors; Metal, cable, wood, etc under plasterboard.
2.This instrument can measure the length, area and volume of the house by laser ranging. Add and subtract measurement, Pythagorean measurement, etc
3. The instrument can emit cross laser line and realize the function of laser line marking with the Angle display of the display screen.
The detection results will be affected by the material, shape and size of the detected object, as well as the material and condition of the detected surface; If the cable is not live, the depth of the probe will be reduced.
Introduction to Angle Instrument
Whichever way the machine tilts, the ball moves in the opposite direction. The current position is in center.
90° measurement, multi-purpose
X and Y are 90° each
Real-time voice broadcast
Detection
Wood detection constant speed ≤ 4cm/s
Distinguish the boundary from the center, long press the wood button for 3 seconds to switch to 38mm deep mode.
Copper wire detection constant speed ≤ 6cm/s
Use the metal mode detection copper wire to show the center only, No depth display.AC icon appears when ac signal is received.When the ac signal is weak, the center of the wire tube shown on the screen shall prevail.
The speaker will announce "ac current" and then send out "drip-drip...".
*copper wire ≥4 mm² and single strands of copper wire. The maximum detection depth is 4CM
The speaker will announce "ac current" and then send out "drip-drip...".
*copper wire ≥4 mm² and single strands of copper wire. The maximum detection depth is 4CM
Nonmagnetic metal detection constant speed ≤ 6cm/s
To obtain the best scanning effect:
• Avoid wearing jewelry such as rings or watches when using detectors.Metals can lead to inaccurate detection.
• Do not touch the detector or scanned surface with the other hand or any other part of the body.
• Always detect slowly to achieve maximum accuracy and sensitivity.
• Do not touch the detector or scanned surface with the other hand or any other part of the body.
• Always detect slowly to achieve maximum accuracy and sensitivity.
Detection of ferrous metals constant speed ≤ 6cm/s
Depth value accuracy is best when the measured object is a standard steel bar with a diameter of 18mm.
Single measurement
Press "DIST" to start the machine, place the machine, and then press "DIST" to measure.
Area measurement
Press "DIST" to start the machine, press the Triangle button to enter the menu and select area measurement.
2 IN 1 Detector/Laser Distance Meter OEM ODM available.