Puri CO2 laser tube 100W 1400mm

Specifications

The Shanghai Puri 10000 hours 60W-160W CO2 catalytic laser tube mainly used for laser engraving and cutting, applies to the vast majority of domestic the laser machinery manufacturing. Puri laser tube is excellent in

• Advanced level laser technology,
• Imported components,  
• Stronger laser power,
• Excellent laser spot,
• Stable quality,
• Long life time,
   

Hot sales Puri CO2 laser tube specification:

CO2 Laser tube Laser tube Working Principle: high-pressure discharge stimulate high concentration CO2 to generate laser.

CO2 Laser tube Laser tube Wave Length: 10.6um.
CO2 Laser tube Laser tube Cooling system: Water-Cooling:purified water, appropriate temperature 10-35°C. 
CO2 Laser tube Working Environment: temperature 5-35°C, humidity 10-60%, clean environment, no serious pollution.
CO2 Laser tube Working Current:16~22mA is appropriate (excessive current will affect laser power and laser tube lifetime.
CO2 Laser tube Safety Demand:CO2 laser tube outputs invisible light, positive with high pressure, if necessary, eyewear is essential.
Lips: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can’t meet demand due to attenuation. )
Laser tube State:
     1, There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube;
     2,On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power.

Puri CO2 Laser Tube Parameter: (Testing & Waiting):