Mini portable 3d glass cube laser engraving machine
Technical parameters
Wavelength | 532nm |
Laser pumping | semiconductor diode |
Laser frequency | 2000HZ |
Maximum pulse energy | 1.2MJ |
Laser power | 3W |
Q-mode | Acousto –optic Q-switch |
Pulse width | 7ns |
Beam quality | m2<1.5 |
Maximum engrave speed points | Speed is 120000 points/min |
Maximum marking scope | 70*70*70mm |
Laser head | single |
Resolution | 800DPI |
Focal length/Focus diameter | 100mm/0.02mm |
Cooling | air cooling |
Application materials | crystal;glass;hard plastic etc. |
Size |
20cm*67cm*52cm
|
Machine weight | 45.3 KG |
Device input power | AC220V±10% 50-60Hz |
HS CODE | 84561000.90 |
1.Our outer packing is plywood box.Needn’t timber inspection,saving shipping time.
2.All the spare parts of the machine were covered by some soft materials,mainly using pearl wool.
Avoiding all damages that could happen in the delivery process.Then we’ll covered plastic wrap out it tightly,make sure intact of the covered soft materials,also avoiding Waterproof and rust proof.
3.The outmost is wooden case with fixed formwork.
4.The bottom of the wooden case has firm iron jack,convenient to Handling and transport.
My Office
My Factory
My Export Experience
If you are interest in our products or our services, please contact us, you will get the best reliable products in reasonable prices.