Products Description
Gantry CNC flame plasma cutting machine
Economical gantry CNC flame plasma cutting machine includes numerical control system, drive system, control system,mechanical
system, pneumatic system. This machine is mainly used for sheet metal flat flame plasma cutting of various shapes,complete functions,high degree of automation,advanced configuration,high cutting precision,good quality,good dynamic stability. CNC system,
servo system adopts domestic and foreign well-know brands,products with excellent properties and convenient man-machine
interface,friendly operation,abundant software and hardware configuration,high quality comprehensive protection measures to
provide users with a high quality product.
system, pneumatic system. This machine is mainly used for sheet metal flat flame plasma cutting of various shapes,complete functions,high degree of automation,advanced configuration,high cutting precision,good quality,good dynamic stability. CNC system,
servo system adopts domestic and foreign well-know brands,products with excellent properties and convenient man-machine
interface,friendly operation,abundant software and hardware configuration,high quality comprehensive protection measures to
provide users with a high quality product.
Voltage | Machine voltage:220v, single phase Power source voltage:380v, three phase |
Cutting effective area(mm) | Effective Cutting Width (mm): 2000 Effective Cutting Length (mm): 4000 |
Machine size(mm) | The Disctance of rail (mm): 3000 The Length of rail(mm) :6000 |
Torch up-down moving distance (mm) | 170mm |
Cutting speed (mm/min) | 50-12000mm/min |
Flame cutting torch (Pcs) | 1 |
Max flame cutting thickness (mm) | 1-150mm |
Plasma cutting torch (Pcs) | 1 |
Plasma cutting thickness(mm) | 0-40mm |
Plasma power source | 200A huayuan brand |
Cutting speed(mm/min) | 50-12000mm/min |
Torch height controller | Plasma, Arc voltage height(THC) |
Set the speed error(%) | ≤±5% |
Product advantages:
During the plasma cutting process, a large amount of cutting gas will be generated, and the plasma arc will have dazzling strong light. Underwater plasma cutting can effectively eliminate the toxic smoke and dust generated by the cutting and the damage of the plasma arc to the human eyes.
Working principle:
Underwater plasma cutting dust removal, there is a cutting platform with a water level that can be raised and lowered. When cutting starts, the air inlet valve opens the fan to inflate the water bed air bag, and the water level rises rapidly. When the water just floods the steel plate, the pneumatic valve is closed. The water level stops moving. The soot and arc light produced are all absorbed by water. When the cutting is over, the air outlet valve opens, and the airbag deflation water level drops for the operator to mark and unload. This kind of dust removal method is the best dust removal method at present, but it is affected by water cutting speed, cutting ability, and surface Compared with dry cutting, the finish is reduced to different degrees. When cutting steel plates of the same thickness, the power consumption is about 15% higher than that of dry cutting. The manufacturing cost of the water bed is relatively high.
product description:
The "Gantry Type CNC Underwater Plasma Cutting Machine" produced by our company has a variety of specifications with a horizontal span of 3m-10m (effective cutting width minus 0.8m), and the length of the longitudinal guide rail is configured according to user requirements. Both adopt bilateral drive, and can be equipped with multiple plasma cutting torches and supporting automatic height adjustment system according to user requirements, and can also be configured for dual-use CNC dry cutting and CNC underwater cutting.
During the plasma cutting process, a large amount of cutting gas will be generated, and the plasma arc will have dazzling strong light. Underwater plasma cutting can effectively eliminate the toxic smoke and dust generated by the cutting and the damage of the plasma arc to the human eyes.
Working principle:
Underwater plasma cutting dust removal, there is a cutting platform with a water level that can be raised and lowered. When cutting starts, the air inlet valve opens the fan to inflate the water bed air bag, and the water level rises rapidly. When the water just floods the steel plate, the pneumatic valve is closed. The water level stops moving. The soot and arc light produced are all absorbed by water. When the cutting is over, the air outlet valve opens, and the airbag deflation water level drops for the operator to mark and unload. This kind of dust removal method is the best dust removal method at present, but it is affected by water cutting speed, cutting ability, and surface Compared with dry cutting, the finish is reduced to different degrees. When cutting steel plates of the same thickness, the power consumption is about 15% higher than that of dry cutting. The manufacturing cost of the water bed is relatively high.
product description:
The "Gantry Type CNC Underwater Plasma Cutting Machine" produced by our company has a variety of specifications with a horizontal span of 3m-10m (effective cutting width minus 0.8m), and the length of the longitudinal guide rail is configured according to user requirements. Both adopt bilateral drive, and can be equipped with multiple plasma cutting torches and supporting automatic height adjustment system according to user requirements, and can also be configured for dual-use CNC dry cutting and CNC underwater cutting.
Application Industry
Metal sheet, such as Iron plate, aluminum plate, titanium,copper, stainless steel plate, galvanized sheet, white steel plate,
metal materials and so on.
metal materials and so on.
packing&shipping
1. Film. Put PE film on the machine and some spare parts, then put bubble wrap to the machine.
2. Free-fumigation wooden case with steel tube support on wooden cover. Humidity-proof paper above the wooden plate.
This kind of package could protect the machine very well from dust and humidity etc.
Our service
1) Three year quality guaranty, the machine with main parts(excluding the consumables)
shall be changed free of charge when if any problem during the warranty period.
(2) Lifetime maintenance free of charge.
(3) Free training course at our plant.
(4) 18 hours on line service each day, free technical support.
(5) Machine has been adjusted before delivery.We will take machine photos and make machine working image for you ,after gettingyour agreement ,then we will book a ship.
(6) Providing technical services to the door(We have professional engineers to offer machine installation commissioning and maintenance).
(7) If you have any problem during your use.you need our technician to judge where the problem is and help you to solve it. We can provide team viewer and skype with cam till all of your problems solved
Company information
Shenzhen Tip-Top Manufacture &Trading Co., Ltd is a branch company with engineers and research and development for 16 years. It is a professional manufacturer engaged in the research, development, production, and service of fiber laser marking machine. Fiber laser cutting machine, fiber laser marking machine, CNC router, laser engraving machine, laser welding machine, and CNC plasma cutting machine.
FAQ
1.What kind of guarantee do you offer on your professional range of CNC and laser machine?
We offer a full 36 months back to base warranty on the router cnc and relevant manufacturers warranty on 3rd party add ons. This covers electrical and mechanical parts under ‘normal use’.
2.How do you send your CNC router and laser machine?
They are firstly greased thoroughly and packaged in a free-fumigation wooden crate. Usually, we send machine by ship, sometimes, as customer’s requirement, send by air or by train. When the goods arrive at your sea port or destination, you can pick up goods with the bill of lading we offered. Or we can arrange the cargo agent to send goods to your door.
3.I want a size that you don’t make as standard, is this possible?
Absolutely, we design and manufacture everything ourselves and indeed do many custom builds.
4.I am new to CNC and laser, how difficult are your machines to operate?
We help a lot of beginners, if you have a reasonable knowledge of computer and are willing to spend a little time learning it is not that had. Quite often when we sell a machine we send the manual out before the machine is ready for the customer to read ahead.
5.Does machine comes with software?
Yes, we offer intelligent and compatible software with machine, so it will be more convenient for you to operate machine.
6. Do you offer training about products?
Yes, customer could get free training at our factory; or we can assign technician arrive at customer’s company for the training at some charge, and accommodation, food, tickets will be charged.