Product Description
Fiber laser cutting machine It can do plane cutting, but also do bevel cutting, and the edge neat, smooth, suitable for high precision metal plate cutting, at the same time with the arm can be three-dimensional cutting instead of the original five Axis laser. Compared with ordinary carbon dioxide laser cutting machine to save space and gas consumption, high photoelectric conversion rate, is a new energy-saving products, but also one of the world's leading technology products.
Laser Source Power/Cutting ability
| Laser Source Power/Cutting ability | CS(mm) | SS(mm) | Alumium(mm) | Brass(mm) | |
| 500W | Max cutting thickness | 8 | 4 | 2 | 2 |
| Max processing thickness | 5 | 3 | |||
| 700W | Max cutting thickness | 10 | 6 | 3 | 3 |
| Max processing thickness | 6 | 5 | |||
| 1000W | Max cutting thickness | 14 | 8 | 4 | 4 |
| Max processing thickness | 8 | 6 | |||
| 1500W | Max cutting thickness | 16 | 10 | 6 | 5 |
| Max processing thickness | 12 | 8 | |||
| 2000W | Max cutting thickness | 20 | 12 | 8 | 6 |
| Max processing thickness | 16 | 10 | |||
| 2500W | Max cutting thickness | 22 | 12 | 10 | 8 |
| Max processing thickness | 20 | 10 | |||
| 3000W | Max cutting thickness | 25 | 14 | 12 | 8 |
| Max processing thickness | 22 | 12 | |||
GS-LFDS3015 Technical Specifications
| Model | GS-LFDS3015 |
| Laser source medium | Fiber |
| Cutting range (L*W) | 3000 mm * 1500 mm |
| Z axle stroke | 250 mm |
| Max. positioning speed | 120 m/min |
| X, Y axle Max. accelerate speed | 1.2 G |
| Cooling form | water cooling |
| Laser wavelength | 1070nm |
Output power of laser source
| 500w |
| Min. cutting gap | ≤ 0.1 mm |
| Positioning accuracy of X, Y and Z axles | ± 0.03 mm |
| Repeated positioning accuracy of X, Y and Z axles | ±0.01mm |
| Thickness of cutting material (according to material) | 0.2 - 25 mm |
| Drive model | Imported servo motor |
| Power requirement | 380 V, 50/60 Hz |
| Working temperature | 5 - 45ºC |
| Continuous working time | 24 Hours |
| Machine weight | About 5850Kgs |
| Outer dimension | 8500 mm * 3800 mm * 2000 mm |
| Total protection level of power supply | IP54 |
Fiber Laser Cutting Machine Advantages
Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of cutting pieces can be up to + / - 0.05 mm.
Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can be used as the final working procedure, parts can be even used directly without mechanical processing.
Heat affected zone is very small, material performance is hardly affected near the kerf width , and the workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes appear to be regular.
Cutting Simples
It is used to cut Metal,such as stainless steel, carbon steel, alloy steel, silicon steel, spring steel,galvanize plate, pickled plate, copper plate, aluminum plate, etc.We are honored to offer you samples. New clients are expected to pay for the courier cost, the samples are free for you, this charge will be deducted from the payment for formal order.
Packing pictures of the CNC metal fiber laser cutting machine with safety shield: