1610 polywood / MDF / acrylic doard laser cutting machine
laser cutting machine Feature:
Two heads can be engraved or cut off at the same time. Or one of two heads work alone. please attention that dual head to do same things is operated by control system. to some extend, high efficiencey in a short producing time.
1) laser cutting machine Advantages:
----Modern smart design.
---Transparent acrylic watching door, easy checking work process.
---Independent laser tube cabinet, protect tube and easy change
---Red cross point offers the highest accuracy position.
---High efficiency tube with stable laser path. 40W—90W life time reach to 4000—10000 hours.
--- Professional motion control card offers continue fast curve cutting together with shortest path selection. Shorten work time.
---U disk offline operation makes work convenient.
1.model: MC1610 working area: 1600*1000mm (width*length:mm)
Tips: worktable is with open structure. There is no limited to the length of processing materials.
A. metal-bars worktable is installed into MC1610 laser machine to process hard materials like wood, MDF,acrylic, plastic, stone,etc.
B. honeycomb worktable is installed into laser machine to process soft materials like paper, fabric,leather, rubber sheet,etc. which is match with exhaust fan to fasten processing materials on the surface of worktable.
NO need other clamps to fasten processing materials.
C. motorized up and down worktable: you can put on less than 25mm materials on the surface of worktable.
Please attention that the above 3 kinds of worktable will be installed into MC1610 laser machine
based on your special needs.
2. laser head
High quality anti-rust laser head which inside with one pc of reflector mirror and one pc of focus lens .
Meanwhile, auto-focus device(optional part: red ) next to laser head, mainly to confirm automatically the distance between laser head and processing materials before cutting.
red dot postion shows you where the laser beam work in.
3. laser power
RECI brand laser tube:80w/100w/150w based on your needs to install into MC1610 laser machine.
long life and long warranty(8 months).
4. water-cooled tool
water chiller is used to cool laser tube down during working
40w/60w 80w laser power, it is better to choose Cw3000 water chiller.
100w/150w laser power, it is better to choose Cw5200 water chiller
5. auxillary parts.
air pump is used when to process acrylic, glass,fabric, stone,etc. to keep high quality processing effect.
exhuast fan mainly used to exhaust smoke or dust, specially to engrave or cut off wood.
♦ MC laser machine can engraving beautiful portraits, pictures on the surface of all kinds and all shapes of the nonmetallic materials, it can also engrave diversified marks and brands, this is a machine with good performance and low price.
♦We can supply different Working area&Laser power for your need
-------Working area :500*300mm//500*400mm//600*400mm//600*900mm//1200*900mm/
1300*900mm/1400*900mm/1600*1000mm/1300*2500mm/1500*3000mm/
------Laser Power :40w /60w/80w/100w/130w/150w/180w
2) laser cutting machine Applicable materials:
Acrylic , perspex, glass, wood, stone, marble, gravestone, rubber, leather,fabric, paper, cltoh, dual-colour boards.
3) laser cutting machine Applicabe industries:
1.artcrafts: wood,bamboo, elephant's tusk,bone, leather, marble,sea shell etc.
2. advertisement: double color board,acrylic engraving and cutting,label engraving,crystal etc.
3. model industry: sand table constructtion model,plane model etc.
4. packing:rubber engraving,plastic,doubling plate,die board cutting etc.
5. leather and cloth process:compound leather,man-made leather,fabric,fur ,toy etc.
6. other industry : marble,granite,glass,crystal engraving,paper/greeting card cutting etc.
4) laser cutting machine Parameters :
Model | MC1610 |
Working Area | 1600*1000 |
Laser Power | 60w/80w/100w/130w/150w/180W |
Laser Type | CO2 Sealed Laser Tube , 10.6μm |
Cooling Type | Water Cooling |
Engraving Speed | 0-64000mm/min |
Cutting Speed | 0-36000mm/min |
Laser Output Control | 0-100% Set by Software |
Min. Engraving Size | Chinese: 2.0mm*2.0mm, English Letter:1.0mm*1.0mm |
Highest Scanning Precision | 2500DPI |
Locating Accuracy | ≤+0.01mm |
Controlling Software | DSP Control System |
Graphic Format Supported | DST, PLT, BMP, DXF, DWG ,AI LAS,etc. |
Compatible Software | CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc. |
Color Separation | Yes |
Drive System | High-precision 3-phase Stepper Motor |
Auxiliary Equipments | Exhaust Fan and Air Exhaust Pipe |
Power Supply | AC110V/220V+10%,50HZ/60HZ |
Working Environment | Temperature:0-45C,Humidity 5-95%(No Condensate Water) |
Precision | Red Dot Position System |
5)laser cutting machine sample :
Laser tube power | PMMA | Acrylic | Plywood | MDF sheet |
40W | 5mm | 3mm | 0.5mm | 0.5mm |
60W | 15mm | 8mm | 5mm | 4mm |
80W | 15mm | 12mm | 8mm | 7mm |
100W | 20mm | 15mm | 10mm | 9mm |
130W | 25mm | 20mm | 15mm | 13mm |
150W | 30mm | 30mm | 20mm | 20mm |
7)Our services
1)Guarantee for 12 months except comsumable parts .Extra fee is paid if out of date. Any damage to the machine caused by improper use will be charged.
2)when receiving the your money, we will prepare machine for you,it will spend 2-3days, to get the shipping pictures for you.
3)24-hour technical support Internet or by Telephone, free instructions and Problem solving.
4)Free installation and fully test before sending and free training for operators
8)Packaging and shipping
1. Packing wooden case is after fumigation treatment. Needn’t timber inspection,saving shipping time.
2.All the spare parts of the machine were covered by some soft materials,mainly
Avoiding all damages that could happen in the delivery process.Then we’ll covered plastic wrap out it tightly,make sure intact of the covered soft materials,also avoiding Waterproof and rust proof.
3.The outmost is wooden case with fixed formwork.
4.The bottom of the wooden case has firm iron jack,convenient to Handling and transport.
9)Factory
Our office:
If you have any questions ,pls ask me ,I will do my best to satisfy you.