Disc cutting machine

 

Specification:

Engine Model	WQJ-1000	WQJ-1300
Dia.of cutter(mm)	1000	1300
Rotating speed of cuter(r/min)	40.5	40.5
Cycloid reducer	BWD3-35-4KW	BWD3-35-4KW
Power(kw)	2.2	2.2
Capacity(t)	2	3
N.W(T)	1	1.2
Packing of Dimension(mm)	1840x1130x1400	2200x1130x1650

 

Working principle:

A Disc cutting machine cuts large rubber blocks off the main block and makes use of a cycloid motor to operate the blade and a hydro-cylinder which enables the work table to carry out a forward and backward movement. A Disc cutting machine is a rotary disc cutting machine for cutting off rubber blocks (for example: natural rubber, reclaimed rubber, compound rubber, silica rubber). Mainly it is used in production cutting processes, but it can also be used for others materials.

A Disc cutting machine consists of a blade, work table, hydro-cylinder, hydraulic system, electronic control, a lubrication mechanism and a protective cover etc.A  Disc cutting machine has two engines; one is for driving the cylinder motor of the blade, and the other is for driving the motor of the hydraulic system.

A traditional cutting machine is vertical and cuts off the rubber blocks by means of an up and down motion. However this limits the performance and output of the cutting machine, is labor intensive and has hidden dangers. Our Disc cutting machine are operating in China and abroad in all areas of rubber production. Compared with a vertical guillotine cutting machine, a circular rotary blade increases efficiency and the continual motion of the blade makes the material thinner. It also ensures the rubber material is clean after cutting and there is no need for the worker to bend down because the work table is under the center of the blade. At the same time, we use a special purpose blade which is also used for cutting granite and marble thus making the blade more resistant to wear and tear and giving it a longer life. To summarize, Disc cutting machine cut rubber blocks into strips which means less energy is needed to operate equipment that is used to process the rubber after the cutting machine. Additionally, it means the damage rate of other processing equipment is also lower. It really is an ideal cutting machine for every rubber manufacture, with a high level of cutting efficiency, low labor requirements and convenient operation.

 

Function:

We cut the raw material into smaller pieces for some machines such as refine, dry mix and plasticity equipment before feeding the raw material into industrial rubber machines. The rubber blocks are inspected and graded before being accepted and put into storage. In the early years of rubber production, workers used saws to cut and check rubber blocks, which was inefficient, labor intensive and took more time. Vertical guillotine rubber cutting machine operation is not particularly safe and needs more operators, therefore, this kind of rubber cutting machine is gradually being phased out.A Disc cutting machine is a new, more practical piece of cutting equipment that does not have the deficiencies mentioned above.