Principle:
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.
Fractional Co2 laser treatment:
Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.
Plastic surgery fractional co2 laser machine/ Vaginal tightening laser
1.Fractional CO2 Laser Machine Principle:
Fractional co2 laser is a revolutionary advances base on fractional photothermolysis theory,and shows a unique advantagesin a short period of time.fractional laser generate tiny beam of light like arrangement, acting on the skin to form a pluralityof three-dimensional columnar structure tiny thermal damage zone, called microscopic treatment zones,MTZ.
Diameter is 50-150μm, depth 500-1000μm, difficult from traditional exfoliative laser produce sheet
heat injury, around every MTZ has whole normal tissue, Keratinocytes can quickly crawl, MTZ healed quickly, without leave, exfoliative treatment risks.
This machine adopts CO2 laser technology and precise control of the scan technology, using the CO2 laser’s heat penetrating action, in the guidance of the scan precise scanning, 0.12mm diameter thin minimally invasive aperture was formed by
lattice-shaped on the skin. Skin in the effect of the laser energy and heat, wrinkle or scar tissue was uniform
gasified instantaneous and formed minimally invasive hole as the center of the micro-heating zone, so as to stimulate the skin synthesize a large number of new collagen tissue. and thus start the tissue repair, collagen rearrangement of a series of body's natural healing mechanisms. Fresh collagen random regenerate, make the treated area of skin becomes smooth, firm, elastic, pores shrink, wrinkle reduction , bags under the eyes disappear, the pigmentation disappear, superficial scar calm, skin texture and skin color gradually improved significantly.
During the treatment, the skin tissue water absorb laser energy, gasification formed of a plurality of columnar structure small damage region, slight damage zone collagen contraction hyperplasia, and no effect skin tissue can be used as the thermal diffusion region to avoid the side effects of thermal damage, promote the healing of the skin faster at the same time, to achieve skin tightening, skin rejuvenation and improve scars, shrink pores purpose.
Fractional laser targeted tissue is water, so treated skin color is not selective, another advantage of fractional laser is the original energy intensive spot dispersed into the tens to hundreds of small focal spot, only for the minimally invasive treatment of skin lesions, does not affect the normal skin tissue, the patient's pain greatly reduced, also reduce the side effects of laser therapy, treatment and maintenance of patients are more precise , safe and more secure.
2.Vaginal Tightening Laser Theory
Vaginal tightening laser is the use of water uptake 10600nm gold standard laser, using a three-dimensional lattice technology and 360-degree circular emission perfect combination of technology, to produce 50-70 degrees Celsius in a controlled depth of the vaginal mucosa, stimulate lamina propria and myometrium newborn fibroblasts, and damaged collagen fibers, elastic fibers, such as restructuring, so as to achieve vaginal wall thickening and tighteningof the vagina so that firmness, sensitivity enhancement, vagina tight as ever.
Vaginal tightening laser does not produce skin burns due to high temperature, each capable of Homogeneous heat, acting on a few hundred nanometers thickness Mucosa organization.
3.Fractional CO2 Laser Machine Application
Sun damage recovery and skin renewing .
Eliminates scrub .
Tighten skin,anti-aging.
Improve blood circulation and metabolism.
Face lift, Tighten and whiten skin.
Pierce ears .
Effective treatment with skin hydroponic, skin rough .
All colors tattoo removal .
Remove all kinds of wrinkles: wrinkle around the eyes, crow's-feet, and wrinkle formed by lack of water, ect.
Remove acne and scars: whelk, burnt scars, surgery scars, scabby acne, allergic acne, papilla
acne,brandy nose, ect.
Remove neoplasms: wart, syringoma, sebaceous gland tumor, becker, nevus, haemangioma, adipoma, steatoma and seborrheic keratosis,ect
Remove pigment: chloasmas Age spots, blemishes, speckle, nevus, birth mark
4.Vaginal Tightening Laser Application
Thermal radiation make Mucosa tissue contraction and collagen fibers thereby improving and restructuring vaginal tightening.
1. Shrink vagina: rapid tightening, constriction, lasting firmness.
2. Beautify vagina: dilute pigment, pink labia.
3. Moist vagina: increase secretion, eliminate dryness.
4. Maintenance vagina: deep rejuvenation, prevent aging.
5. To improve sensitivity.
6. Private health, balance PH, improve the internal environment.
5.Fractional CO2 Laser Machine
Wavelength: | 10600nm |
Laser apparatus: | Sealed off laser device simulated by direct current |
Optical beam quality: | TEM00 |
Output power: | 40w |
Spot size: | 0.02~0.05mm2 |
Aiming beam: | Red semiconductor laser (635nm, less than 5mw) |
Beam transport device: | Articulated arm with 7-joint and balance weight |
Working mode: | Continuous operation |
Output Mode: | Continuous, single pulse, interval pulse and super pulse |
Scan scope: | Max 20mmx20mm |
Scan graphics: | Circle, triangle, square, rectangle,hexagon, ellipse, line |
Scanning Mode: | Random , Normal and Midsplit scan |
Scanning speed: | More than 10m/s |
Energy: | 1- 40W |
Distance: | 0.1-2.6mm |
Cooling system: | air circulation |
Weight: | 60kg |
Dimension: | 65*48*117cm |
Power: | 220V/11V |
Principle:
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.
6.What is CO2 fractional laser?
7.Fractional CO2 Laser Machine Advantages
1. Scan mirror:Germany technology, perfect accuracy, effective treatment effect.
2. Guide light arm: 7 joint articulated arm, high quality, accuracy is great.
3. Power supply: high power, super pulse can reach 500HZ/s. so the energy is high, treatment speed is fast, skin damage is small.
4. Spot diameter is small, so the treatment spot is small, wound area is small, recover much faster.
5. Every spot is same, include the depth, size, and no miss spot in the treatment area, shape is not any distortion. other company's spot are not same size and same depth.
6. Speed is more than 10m/s, so the thermal damage is small, and less pain.
7. Density, depth, and shape, all can be adjusted, very convenient.
8. Scan models: free scan, sequence scan, maximum distance scan, free scan and maximum distance scan technology
9. Four treatment heads, can be used for different treatment, very convenient.
10. 7 different scan shape, adapt to different customer’s request.
11. Distance: 0.1mm-2.6mm, lots of other company only reach 2mm.
12. Power: 30W, but lots of company only 12W, 15W.
1.Standard Export Package:aluminum alloy case & PE soft material inner
1. How do I know if I need CO2 laser?
Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.
2. What benefits can I expect?
Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking
3. Is there another way to get the same effect?
Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.
2.Offering the door to door services depend on your actual request. Such as DHL,
UPS, TNT, FEDEX… by air; and the sea transportations.
Guarantee: We are the leading professional manufacturer in China which supply 1-3 year warranty.Within the warranty, we offer the repairing and replacement parts for free.
Service: There is OEM&ODM service for distributor.
Training: After you get the machine, there is user manual, maintain manual, training CD guide you to operate the machine.
Dear ladies and gentlemen:
Over 10 years Manufacturer- Strong production capacity
Wecan keep you always ahead in the aesthetics & medical devices field. we have its own research & development, sales and after-sales departments; can offer the professional techn
...
1. How do I know if I need CO2 laser?
Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.
2. What benefits can I expect?
Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking
3. Is there another way to get the same effect?
Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.
Fractional Co2 laser treatment:
Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.