Specifications
1.Scars Removal
2.Pigment Removal
3.Skin Rejuvenation
4.OEM
2013 Factory Direct Sale!! Fractional Co2 Laser Machine with CE
1. Skin renewing and resurfacing
2. Smooth burnt scars and surgery scars, etc
3. Wrinkle removal, skin tightening
4. Acne and acne scar removal
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
7. OEM service
Introduction of Fractional Co2 Laser Machine with CE
Adopt RF-excited laser system enables the output quality more stable, uniform compared to CO2 fractional laser with glass tubes
Theory of Fractional Co2 Laser Machine with CE
Fractional laser light penetrates the skin with tiny thermal channels through the random scanning, creating an ablative and thermal effection only channels (a micro-injury) without damaging the surrounding tissue. The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing. As collagen remodels, skin tightened, scars improved and pigmented lesions removed.
Application of Fractional Co2 Laser Machine with CE
- Application Range of Fractional treatment handpiece
- Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
- Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
- Reconstruction of photoaging skin.
- Application Range of Incision Handpiece
- Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
- In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
Advantages of Fractional Co2 Laser Machine with CE
- Three modes of laser energy output are selective: UltraPulse, CW and Fractional modes
- Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes)
- Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients
- Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during the treatment, satisfy different therapiests’ unique request.
- 12.1” TFT touch LCD, rotated 360° gives you a luxury enjoyment;
- Reserved entry access for laser room ensures a safe treatment
- Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total of ownership.
SPECIFICATION of Fractional Co2 Laser Machine with CE
Laser Type | CO2 |
Wavelength | 10600nm |
Beam Delivery | 7-joint arm |
Maximum Output Power | 30W/40W |
Optical Beam Quality | TEM |
Spot Size | 0.12-1.25mm (Adjustable) |
Power of the Aiming Beam | Less than 5mW |
Aiming Beam | 635nm |
Scanning Mode | Randomized Scanning |
Laser Operating Mode Fractional Co2 laser treatment: Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth. | UltraPulse, CW, Fractional |
Cooling | Air Cooling |
Pulse Energy | 10mj~200mj (every stepping:2mj) |
Spot Pattern | Triangle/Square/Rectangle/Rhombus |
Pulse Interval | 1ms~100ms (every stepping:1mj) |
Scan Area | 10mmx10mm,20mmx20mm,30mmx30mm |
Working Mode | Continuous operation |
Spot Density | 36 spots/cm²,144 spots/cm²,576spots/cm²,with intermittent loading |
Power Supply | AC 220V 50Hz/AC 110V 60Hz |
Net Weight | 45KGS |
Gross Weight | 60KGS |
Dimensions(before packaged) | 650mmx340mmx760mm |
Dimensions (after packaged) | 760mmx455mmx975mm |
Principle:
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.
PICTURES of Fractional Co2 Laser Machine with CE
Features:
1. Reduced thermal damage to surrounding tissues
2. Rapid healing and minimal downtime
3. Stimulate deeper collagen with high pulse energy
4. LCD display panel provides easy operation with the latest microprocessor technology
5. Adjustable scanning patterns and size
6. Adjustable intensity of pilot beam from zero to maximum
7. Adjustable pulse duration
8. Last treatment setting memorization
9. Automatic alarm system for operation and troubles
10. Covers all functions of conventional system
11. No consumable costs
