Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

medical fractional co2 laser equipment

1.CE,1 year warranty
2.RF,glass tube
3.15w/25w/30w/35w
4.Coherent/Access tube

Applications of medical fractional co2 laser equipment

1. Skin renewing and resurfacing

2. Smooth burnt scars and surgery scars, etc

3. Wrinkle removal, skin tightening

4. Acne and acne scar removal

5. Remove intractable chloasmas and pigmentation

6. Sun damage recovery

Features of medical fractional co2 laser equipment

1. Particular designed intelligent laser control system ensures a precise treatment

2. Laser energy shooting is an even steady and safe treatment process.

3. Wide range application, effective treatment

4. Easy and fast treatment, no down time.

Main specifications:

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Basic specification
Laser mode	Low-valance mode
Wavelength	10.6μm, far-infrared laser
Pulsed radiofrequency	0.530 W
Control	Touching switch, microprocessor-controlled
Display	LCD display
Lcd	1.Max power : 120W 2.Pulse width: 0.05-1s
Pulse	1. Average power: 40W 2. Pulse frequency:33.3 Hz
Working mode:	Continuous, single pulse, repeat pulse and super plulse
Scan Graphics	Square, rectangle, round or customized graphics
Dot quantity	400 dots at most
Working state	Hyper-pulsed mode
Scan mode	Sequence scan or Random scan
Pulse energy	10mj to 130mj is optional for each dot. Application: 1. Application Range of Fractional treatment handpiece a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks. b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid; c. Reconstruction of photoaging skin. 2. Application Range of Incision Handpiece a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
Technical specification
Laser apparatus	Sealed off laser device stimulated by direct current
Condenser focus	f=100mm
Beam divergence angle	0.3 mrad
Spot size	Min 0.2mm at the focus
Radiation time	1 ms
Interval time	1 ms
Aiming beam	Less than 2mW, 635nm red semiconductor laser
Cooling system	Closed loop circulating water
Environment temperature	5-400C
Relative humidity	<80%
Temperature in transit	-40-500C
Humidity in transit	<85%
Beam transport device	Articulated arm with 7-joint and balance weight
Atomospheric pressure	86.0kkpa-106.0kpa
Warning up time	5 min
Electromagnetic requirement	No electromagnetic Field interference
N. weight (kg)	55kg
Power supply	230V/110V

$medical fractional co2 laser equipment$

$medical fractional co2 laser equipment$ $medical fractional co2 laser equipment$ $medical fractional co2 laser equipment$ $medical fractional co2 laser equipment$

$medical fractional co2 laser equipment$

OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.

Laser Type	CO2 Laser
Q-Switch	No
Style	Stationary
Certification	CE with LVD&EMC , ISO13485, ISO9000, ISO9001,SFDA, SGS, etc
Place of Origin	Beijing, China
Brand Name	GL
Model Number	GL080
Feature	Acne Treatment, Anti-Puffiness, Pigment Removal, Pigmentation Correctors, Skin Rejuvenation, Skin Tightening, Other, Acne Treatment, Anti-Puffiness, Pigment Removal, Pigmentation Correctors, Skin Rejuvenation, Skin Tightening, scar removal, skin re-new

Treat Telangiectasis Medical Fractional Co2 Laser Equipment Portable

Product Features

You May Like

Find Similar Products By Category

You May Like