The range of IPL treatment:
(1)Everlasting hair removal:remove unwanted hairs under arms,on legs ,lips or other body part,etc.
(2)Pigmentation treatment:remove various kinds of pigment such as freckle,chloasma,aged spots,sunburn,etc.
(3)Telangiectasis treatment:treat angiotelec-tasis.
(4)Acne treatment:papule,tuber,Blain,acne,etc.
(5)Shrink pores,tighten skin,improve skin elasticity and glossiness.
(6)Eliminate and smooth wrinkles,acne treatment.
Main Technical Parameters:
Laser wavelength: 10.6µm
Laser unit:TEM00 module Co2 unit (best quality for the facula)
Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W
Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode
Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible
Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery
Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface
Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm
Pulse width: the minimum pulse width is 0.1ms
The CO2 laser produces a beam of infrared light with the principal wavelength bands centering around 9.4 and 10.6 micrometers. With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.
Treatment theory
e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling
The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.
Applications of fractional laser co2 machine :
- Skin renewing and resurfacing;
- Skin tightening;
- Acne and acne scar removal;
- Smooth burnt scars and surgery scars, dermabrasion etc-;
- Remove intractable chloasmas and pigmentation;
- Sun damage recovery
Characters of fractional laser co2 machine :
- USA radio frequency laser
- individual design of laser structure, greatly facility laser replacement and easy daily maintenance;
- Display: 10.4” color touch LCD screen
- Humanized software control, stable laser output, more safe
- Smart articular arm, high accuracy
- Excellent performance, not affect people’s normal life and study
- Packing: aluminum alloy case
Treatment Interface:
Scanning Shapes:
You choose 6 different canning shaps,also you can change the size of scanning shaps at will according to your own needs.So the beam of light can achieve the treatment area accurately
square, rectangle, round, triangle, oval, 6-diamond shape and line
Specification of fractional co2 laser machine :
Basic information | Wavelength | 10.600 nm |
Pulsed radiofrequency | 0.530 W | |
Ultrapulse | 1.Max power: 130W 2.Pulse width:200 to 500μs. you can choose | |
Pulse | Average power: 40W | |
Matrix mode | Scan pattern | Square, rectangle, round, triangle, oval, 6-diamond shape, line or customized graphics |
Scan pattern size | 0.1x0.1mm—20x20mm | |
Dot quantity | 400 dots at most | |
Working state | ultrapulsed mode; | |
Scan mode | free scan; Sequence scan; maximum distance scan | |
Pulse duration | 0.1-10ms | |
Spot distance | 0.1-2mm | |
Pulse energy | 1mj to 100mj is optional for each dot. | |
Technical specification | Laser apparatus | Sealed off laser device stimulated by direct current |
Condenser focus Application:
1. Application Range of Fractional treatment handpiece 2. Application Range of Incision Handpiece The RF equipment has the cooling system of surface layer, and uses proprietary technology to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time, providing you with tighter skin, renewed facial contours. | f=50mm | |
Beam divergence angle | 0.3 mrad | |
Spot size | ≥0.2mm at the focus | |
Radiation time / Interval time | 0.01 1 s | |
Aiming beam | 635nm infrared ray | |
Beam transport device | 7 articular arm | |
Net weight | 57 kg | |
Machine size | 46x61x120cm | |
Power supply | 220V/110V | |
Picture shows:
WHAT CAUSES STRETCH MARKS?
Stretch marks occur when the elastic middle layer of skin called the dermis is stretched. Stretching leads to a breakdown of connective tissue, inflammation, and then scar formation as the injury heals. It's the scarring that causes stretch marks to appear.
Stretch marks are common during puberty and rapid growth spurts in adolescence, pregnancy, excessive weight gain and obesity, pregnancy, when muscle mass increases rapidly and stretches the skin (like during bodybuilding), and sometimes when individuals use steroids for many months. Stretch marks are not a health risk but can be cosmetically unappealing.
How do they look like?
Stretch marks often start off as reddish or purplish in color and then become glossy skin that appears streaked in silver or white.
Men and women can get stretch marks on several areas of their bodies, including the abdominal area, thighs, hips, breasts, upper arms or lower back.
Why Choose Us
1. Credible beauty machine manufacturer and supplier
KM Group is located in the beautiful World Kite Capital Weifang, China.Our company engaged in research, developing, production, sales and after-sale kinds of beauty equipments,over 8 years golden member of Alibaba with Bureau Veritas,over 4 years golden member of Made in China with SGS authentican
2. Authoritative Certificates Quality Assurance
Our products are ertified by CE,ISO13485,TUV,BV, etc
3. Professional testing tool for best quality and excellent after sale service
Our company are very strict in quality of our beauty machine. Before delivery, our engineers will test every part and function of the machine, ensuring our customer can get the most excellent machine.
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
4. After-Sale service
We supply product use training include the manual,DVD and online trainning .When a fault occurs , engineers and experts to provide guidance for the maintenance.
We have two years warranty and lifetime maintenance, we also can supply on-line service
Weifang KM Electronics Co.,Ltd
Contact Person: Tony Zhang
Skype: zhangyan454390509
Mob&Whatsapp: 0086-15165602950
fractional laser co2
fractional laser co2
fractional laser co2
Principle of RF CO2 Fractional Laser
CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.
Fuctions and treatment effect of elight ipl rf
1.Permanent hair removal.
2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal