2015 Newest ! High Power Q switch tattoo removal nd yag laser machine / e-light ipl rf nd yag laser multifunction machine
Treatment Principle:
The machine utilizing the explosive effect of the ND: YAG LASER, the laser permeates the epidermis
into the dermis and takes effect on pigment mass and is absorbed by pigment. Since the laser pulses is
extremely short in nanosecond and comes with super high energy, the pigment mass would swell quickly
and break into small pieces, which will be eliminated through metabolism. In this case, the pigments
become lighter gradually and finally disappear.
Technical Parameter:
Laser type | Electro-Optic ND YAG Q-switch laser |
Laser output method | Pulse adjusting Q |
Working Laser wavelength | 1064nm;532nm;1320nm |
Laser pulse width | 8ns±2ns |
Controller | Key press display |
Pulse Energy | 1800mj(1064nm); 1000mj(532nm) |
Power | 1300w |
Frequency | 1~10 Hz |
Diameter of spot | 0.7~8mm adjustable |
| Beam of light transmission | 7 articular-arm of light guide trasmitting |
| Indicator of aiming light | Red diode laser |
| Cooling manner | Closed-off water circulation+air |
| Net weight | 85Kg |
| Voltage | 220V/110V |
Treatment Scope:
A. Epidermal pigment: Body Tattoo, Eye line and brow Tattoo
B. Dermal pigmnet: Nevus of Ota, birth mark, Coffe Spot, Age Spot, Freckle
C. Vessels disease: varicosity removal, capillary hemangioma
D. Laser facial: oil control, skin rejuvenation, skin pore improvement
Before & After:
Features:
More Pictures:
Interface
FAQ
1. Can you treat all colours?
No. Light is measured in nanometres and there are two wavelengths of light that are emitted from this
laser C one is invisible infrared light (1064nm) and the other is visible green light (532nm). The infrared
wavelength is preferably absorbed into black and dark blue inks, whereas the green light is absorbed by
red ink. It is possible to treat some other colours although white, yellow and bright colours are difficult.
This is not usually a problem however, as lighter colours cover very easily. If you wish to cover-up an
existing tattoo then the darker colours will be faded or removed, allowing you greater choice of size and
colour of the cover- up design you choose.
2. Will the tattoo be removed in one treatment?
No, that is very unlikely. The light can only shatter a certain amount ink in one treatment, so several
treatments are needed at 4-6 weekly intervals to work through the layers. You will notice the tattoo fades
more and more with every treatment you have. A test patch will be performed before a full session goes
ahead to check how you react to the treatment. A professional tattoo can take between 4 C 5 treatments
and sometimes only take 1 or 2. There are several factors that influence the number of treatments required,
these can be down to how easily you heal, how deep the ink is in the skin, and the types of ink that were
used. Generally speaking the longer you have had the tattoo and the darker it is, the easier it is to remove.
3. What happens to my skin after treatment?
The immediate after effect of the treatment is that the skin turns temporarily white, this is due to water
evaporation and disappears with an hour or two. The skin also swells and feels like mild sunburn, this
usually disappears within 24-48 hours. It may blister too. The body continues to remove ink after the
treatment and the skin is usually back to normal within a few days.
4. Are there any side affects?
Sometimes if you use too high energy, bleeding and/or blistering can occur. Especially for lady's skin, very
weak. So you just need to use the energy that can make the tattoos become white, begin from our original
energy.
5. Will the laser treatment scarmy skin?
No. If bleeding or blistering does occur it is very important not to pick any scabs that may result when the
skin is healing C this could cause scarring, and should be avoided as scar tissue can make further treatments
more difficult.
Our Services
1.3 years warranty, if there any problem happens with your machine, we will repair it free
of charge (except the intended damage)
2.Convenient training, user manual and operation video are available, also, if it is not
enough, we can provide the online face to face traning
3.OEM/ODM services, your logo, outshape, language, interface can specially be designed
on your machine
CE certificate
Our professional factory
We are professional manufacture with the best engineers and technical team, R&D team and service team.
We are warmly welcome you to visit our Company. Dear, you will be much confident for our cooperation!
Contact us
Rudy Wu
Beijing Nubway S&T Development Co., Ltd
Website: www.ur-brand.net www.ur-brand.net www.ur-brand.net www.nubway.net
Email : Rudy(@)bjnubway.com
Tel: 0086 10-51206522
Skype: Rudy.nubway
Phone/Whatsapp/Viber: 0086 13717894662
Other hot sale products:
Portable Hifu slimming machine Spider vein removal machine Diode laser hair removal machine