Main Technical Parameters:
Laser wavelength: 10.6µm
Laser unit:TEM00 module Co2 unit (best quality for the facula)
Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W
Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode
Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible
Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery
Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface
Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm
Pulse width: the minimum pulse width is 0.1ms
Glass Tube RF co2 fractional laser skin rejuvenation beauty medical equipment
Fractional Co2 laser Principle:
Fractional co2 laser is a revolutionary advances base on fractional photothermolysis theory,
and shows a unique advantages in a short period of time.fractional laser generate tiny beam
of light like arrangement, acting on the skin to form a plurality of three-dimensional columnar
structure tiny thermal damage zone, called microscopic treatment zones,MTZ. Diameter is
50-150μm, depth 500-1000μm, difficult from traditional exfoliative laser produce sheet
heat injury, around every MTZ has whole normal tissue, Keratinocytes can quickly crawl,
MTZ healed quickly, without leave, exfoliative treatment risks.
This machine adopts CO2 laser technology and precise control of the scan technology,
using the CO2 laser’s heat penetrating action, in the guidance of the scan precise
scanning, 0.12mm diameter thin minimally invasive aperture was formed by lattice-shaped
on the skin. Skin in the effect of the laser energy and heat, wrinkle or scar tissue was
uniform gasified instantaneous and formed minimally invasive hole as the center of the
micro-heating zone, so as to stimulate the skin synthesize a large number of new collagen
tissue. and thus start the tissue repair, collagen rearrangement of a series of body's
natural healing mechanisms. Fresh collagen random regenerate, make the treated area
of skin becomes smooth, firm, elastic, pores shrink, wrinkle reduction , bags under the eyes
disappear, the pigmentation disappear, superficial scar calm, skin texture and skin color
gradually improved significantly.
During the treatment, the skin tissue water absorb laser energy, gasification formed of a
plurality of columnar structure small damage region, slight damage zone collagen contraction
hyperplasia, and no effect skin tissue can be used as the thermal diffusion region to avoid the
side effects of thermal damage, promote the healing of the skin faster at the same time, to
achieve skin tightening, skin rejuvenation and improve scars, shrink pores purpose.
Fractional laser targeted tissue is water, so treated skin color is not selective, another
advantage of fractional laser is the original energy intensive spot dispersed into the tens
to hundreds of small focal spot, only for the minimally invasive treatment of skin lesions,
does not affect the normal skin tissue, the patient's pain greatly reduced, also reduce the
side effects of laser therapy, treatment and maintenance of patients are more precise ,
safe and more secure.
Application:
1, acne and acne scars, scar treatment
2, the eyelid, such as the musculature eye week fine, dry-ribbed remove,blepharoplasty
3, effective and improve facial wrinkles, joints nukabe creases
and stretch marks
4, freckles
5, and lift the skin
6, stretch marks and other deep scars,etc
Technical Specifications:
| Laser Wavelength | 10.6 microns |
| Output Power | 40W. cont adjustable |
| Focus Spot Diameter | 0.4mm,6*6(36 dots),12*12(144dots),24*24(576) CO2 laser system The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis. The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate. |
| Scan mode | Unordered, order, in a dot-matrix scanning |
| Lens Focal Distance | F=100mm |
| Graphics Output | Rectangular, square, triangle, Prismatic |
| Arm | 7-joint articulated arm |
| Operation and control | Touching switch Microprocessor- controlled |
| Working Modes | Continuous, single pulse,repeat pulse, magic Pulse and Fractional |
| Pulse Duration | 0.01~0.99s |
| Cooling System | Closed loop circulating water(see supply circulating water) |
| Environment Temperature | 5~40C |
| Relative Humidity | <80% |
| temperature in transit | -40~50C |
Product details:
Result:
Similar items you may like:
Company Information: Principle of RF CO2 Fractional Laser CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.
Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc