Ati / Amd Sb600 Series 218s6ecla13fg Sb600

CPU Interface
Supports the following Intel processors:
Desktop: Pentium 4, Pentium D, Pentium Extreme Edition, Prescott, Celeron, Celeron D, Cedar Mill, Presler, Conroe, Allendale
Mobile: Mobile Pentium 4, Pentium M, Mobile Prescott, Celeron M, Yonah, Yonah Celeron, Merom
Supports the following AMD processors:
Desktop: Athlon 64, Athlon 64 FX, Athlon 64 FX X2, Sempron, Opteron, dual-core- Opteron
Mobile: Athlon XP-M, Mobile Athlon 64, Turion 64, Mobile Sempron
A-Link Xpress II interface to the Northbridge
1/2/4-lane A-Link Xpress II interface
Dynamic detection of lane configuration
High data transfer bandwidth
PCI Host Bus Controller
PCI rev. 2.3 specifications
up to 6 master devices
40-bit addressing
interrupt steering for plug-n-play devices
concurrent PCI operations
hiding of PCI devices by BIOS/hardware
spread spectrum
USB Controllers
5 OHCI and 1 EHCI Host controllers to support 10 USB ports
All 10 ports are USB 1.1 (“Low Speed”, “Full Speed”) and 2.0 (“High Speed”) compatible
acpi s1~s5
legacy keyboard/mouse
USB debug port
port disable with individual control
SMBus Controller
SMBus Rev. 2.0 compliant
SMBALERT # signal / GPIO
Interrupt Controller
IOAPIC/X-IO APIC mode for 24 channels of interrupts
8259 legacy mode for 15 interrupts
programmable level/edge triggering on each channels
Supports serial interrupt on quiet and continuous modes
DMA Controller
Two cascaded 8237 DMA controllers
lpc dma
type F DMA
LPC host bus controller
Supports LPC based super I/O and flash devices
two master/DMA devices
TPM version 1.1/1.2 devices for enhanced security
SPI devices
SATA II AHCI Controller
SATA II 3.0GHz PHY, with backward compatibility with 1.5GHz
RAID stripping (RAID 0) across all 4 ports
RAID mirroring (RAID 1) across all 4 ports
RAID 10 (4 ports needed)
advanced power management with AHCI mode
IDE Controller
Single PATA channel support
Support PIO, multi-word DMA, and Ultra DMA 33/66/100/133 modes
32x32 byte buffers on each channel for buffering
Swap bay support by tri-state IDE signals
Supports Messages Signaled Interrupt (MSI)
Integrated IDE series resistors
AC Link interface
Supports for both audio and modem Codecs
Compliant with AC-97 codec Rev. 2.3
6/8 channel support on audio codec
Multiple functions for audio and modem Codec operations
Bus master logic
up to 3 codecs simultaneously
Supports SDIF output
Separate bus from the HD audio
HD Audio
4 independent output streams (DMA)
4 independent input streams (DMA)
Up to 16 channels of audio output per stream
Supports up to 4 codecs
Up to 192kHz sample rate
Up to 32-bit per sample
Message Signaled Interrupt (MSI) capability
64-bit addressing capability for MSI
64-bit addressing capability for DMA bus master
Unified Audio Architecture (UAA) compatible
HD Audio registers can be located anywhere in the 64-bit address space
Timers
8254-compatible timer
Microsoft High Precision Event Timer (HPET)
ACPI power management timer
RTC (Real Time Clock)
256-byte battery backed CMOS RAM
Hardware supported century rollover
RTC battery monitoring feature
Power Management
ACPI specification 3.0 compliant power management schemes
Supports C2, C3, C4
C1e and C3 pop-up (AMD platform only)
S0, S1, S2, S3, S4, and S4
SpeedStep™
Full support for On-Now™
Supports CPU SMM, generating SMI# signal upon power management events
GPIO supports on external wake up events
Supports CLKRUN# on PCI power management
Provides clock generator and CPU STPCLK# control
Hardware monitoring support
Support for ASF
Hardware Monitor
3 Independent Fan Control outputs
1 AMDSI function