Paper hot and cold laminating machine GW6-1700 for Spray painting, graphic printout, photo studio,
Main Produce Features:
1, particular function of 6 kinds of film rollers . no need change the different film always
2, Single or double sides laminating process. Convenient for your choice
3, Hot and cold laminating function in single one machine. Easy to suit different materials
4, Automatically laminating, easy to operate.
5, Heating way is heating element infrard . easy to control the temperature. no damage of the rubber roller.
6, Automatic laminating, and foot-propelled-switch two ways of laminating
7, Single man operation. saving the labor cost
8,Single side control the working roller height. easy to raise or down
9, Heating up to 100degree. depends on the thermal film, only Cost $0.1 per square
10, Heating up to 60degree for cold laminating could fully avoid the bubble or snowflake points
11, The effect and the rate of finished products is very high. 50m laminating material in one roll, no any slope
12, Automacally releasing the back paper/waste paper. Automatically collecting the finished product
13, Imported rubber roller. Diameter up to 130mm. High thermostability , good flexibility , Long lifetime
This laminator specially is used for surface post-processing on Spray painting, graphic printout, photo studio, printing industry, building materials industry, PVC sheet, acrylic, tiles, glass, wooden doors etc. fields. It is developed as a easy to use, energy-saving, low-cost laminator
Laminate the film on the surface of the material. It’s a good protection for the materials and images. So the materials could not be scratched and damaged. When using the cold function, please use the cold film. when using the hot function, please use the hot film.
1. Main Technical parameters
Cold and hot laminating process
1), Rated voltage: 220V
2), Frequency: 50HZ-60HZ
3), Length of rubber roller: 1600mm
4), Laminating/Coating width: ≤1580mm
5). Laminating/Coating speed: 0~10m/min
6). Coating temperature: 0°C~130°C
7), Preheating time: 0~20min
8), Thickness of operating materials: 0.1~40mm
9), Thickness of suitable film: 10~250mic
10), Motor powder: 90W
11), Speed gear control: stepless
12), Heating roller elevation height: 40mm
13), Pressure adjustment method: Manual
14), Automatic removing film and rewinding the backing paper device: Motor
15), Gross weight: 260kg
16), Dimensions: 2030*700*1240mm
17) Diameter of roller: 130mm
Wide range of application:
Be suitable for Photo album .poster, image-text printing ,Photo image, silk screen printing
X-frame show image.
apply to the cold lamination / hot lamination of the large area of the
PVC board , KT board and also be the protection film of the plates ,glass, section bar ,acrylic ,and wood door etc.
Other kinds of laminators for sale
We factory offer OEM service!
any question,pls contact us directly Or add my skype:emma-wind1
Looking forward to hearing from you soon !