Delivery Time:45Days
Certification:ISO9001:2000, CE
Hydraulic Bottle Extrusion Blow Molding Machine With Screw Diameter 90 Mm
Main Features:
1) Electrical control system: The machine works under the PLC control(made by the Mitsubishi Co. of Japan) via a man-and-machine interface(displayed in Chinese version or in English version).The machine is equipped with a modularized temperature controller and operated through a touch-type coloure screen.All the production data can be set up,modified,searched and monitored and the machine trouble diagnosis can be completed both on the touch-type screen.The electric elements work on the non-contact working principle,thus being durable in service life.
2) Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.
3) Plasticizing system:The high performance screw used on the machine assures thorough and homogeneous plasticization and mixing of plastics.
4) Speed regulation system:Frequency-converter-controlled speed regulator + speed change gearbox with hardened alloy steel gears.Speed regulation can be completed smoothly with less noise generated.Therefore the machine is durable in service life.
5) Mould opening,closing & moving system:A big 3-point central beam mechanism for opening & closing the mould halves and locking the mould assures balanced distribution of locking force and is free of any deformation after long-time operation.The mould is horizontally moved on linear spherical ball guideways at high traveling accuracy and rapid speed and with less resistance.
6) Air-bolowing needle bracket:The air-blowing needle bracket is of solid L-square design.The sturdy bracket assures smoothness of the product cut.
2) Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.
3) Plasticizing system:The high performance screw used on the machine assures thorough and homogeneous plasticization and mixing of plastics.
4) Speed regulation system:Frequency-converter-controlled speed regulator + speed change gearbox with hardened alloy steel gears.Speed regulation can be completed smoothly with less noise generated.Therefore the machine is durable in service life.
5) Mould opening,closing & moving system:A big 3-point central beam mechanism for opening & closing the mould halves and locking the mould assures balanced distribution of locking force and is free of any deformation after long-time operation.The mould is horizontally moved on linear spherical ball guideways at high traveling accuracy and rapid speed and with less resistance.
6) Air-bolowing needle bracket:The air-blowing needle bracket is of solid L-square design.The sturdy bracket assures smoothness of the product cut.
Machine main components adopt world famous brand, e.g.:
• PLC: MITSUBISHI (JAPAN),
• SCREEN: DELTA (TAIWAN)
• CONDUCTOR: SCHNEIDER(FRANCE)
• AIR SWITCH: MERIINGERIN (FRANCE)
• TRANSDUCER: DELTA (TAIWAN)
• POWER RESOURCE: MEAN WELL(TAIWAN)
• OIL PUMP: YUKEN (JAPAN)
• VALVE: YUKEN (JAPAN)
• SOLENOID VALVE: AIRTAC(TAIWAN)
• PARISON CONTROL SYSTEM: MOOG(JAPAN)
• OIL PIPE, JOINT: LIANHUI(TAIWAN)
• PLC: MITSUBISHI (JAPAN),
• SCREEN: DELTA (TAIWAN)
• CONDUCTOR: SCHNEIDER(FRANCE)
• AIR SWITCH: MERIINGERIN (FRANCE)
• TRANSDUCER: DELTA (TAIWAN)
• POWER RESOURCE: MEAN WELL(TAIWAN)
• OIL PUMP: YUKEN (JAPAN)
• VALVE: YUKEN (JAPAN)
• SOLENOID VALVE: AIRTAC(TAIWAN)
• PARISON CONTROL SYSTEM: MOOG(JAPAN)
• OIL PIPE, JOINT: LIANHUI(TAIWAN)
Specifications:
|
HSTII-12L EBMM Technical Parameters |
||
|
Max Product Volume |
(L) |
12 |
|
Working station |
- |
2 |
|
Screw Diameter |
(mm) |
90 |
|
Screw L/D ratio |
(L/D) |
22~30 |
|
Screw drive power |
(KW) |
37~45 |
|
Screw heating capacity |
(KW) |
7.3~9.1 |
|
No.of heating zone |
(ZONE) |
4~4 |
|
Output of HDPE |
(kg/h) |
130~160 |
|
Output of PVC |
(kg/h) |
105~125 |
|
Oil pump drive power |
(KW) |
11 |
|
Clamping force |
(KN) |
110 |
|
Platen distance |
(mm) |
240~620 |
|
Max.Size of Mold |
(W×H)(mm) |
530×510 |
|
Capacity |
(L) |
|
|
Max.Die diameter |
(mm) |
220 |
