Delivery Time:15-20 Days After Order
Automatic Industrial Filter Press , Steel Chemical Slurry Filter Press
DY series is the best choice for sludge&slurry dewatering in ethonal industry. This equipment has the characteristics as continuous working, good dewatering effects, lower power consumption, lower noisy, easy for operation, and maintenance. It is a very good processing equipment of high moisture spent grain before drying with energy saving greatly
Main advantages:
*Presscake with the lowest moisture content
*Construction with additional 3 sets of Nip-Squeezing rollers,available to get the cake with maximum solids content.
*Reliable and stable in operation
*Reinforce structure design
*Longer lifetime, low maintenance cost
*Low power consumption
According to the specific sludge capacity requirement, the width of macine can be chosen from 1000mm-3000mm.(the choice of thickening belt and filter belt would vary according to different types of sludge). Stainless steel of belt filter press is also available. it\'s our pleasure to offer the most suitable and most economic effective proposal for you according to your project!
Working principle:
After mixing with the prepared flocculation in the dynamic and static mixer, the small particles solids in the concentrated sludge would form bigger size of flocculated sludge and the free water is separated. Flocculated sludge is conveyed to the belt then it further goes to the gravity dewatering area. Under the gravity, free water would fall on the tray, and the rest sludge would be nipped between two belts. Then it would further goes to the wedge zone for pre-filtration, and then to low pressure zone and high pressure zone through the decreasing diameter rolls. Under the extrusion and shearing force, the solid and liquid is separated. Finally filter cake with expected low moisture content is discharged.
Application:
Pharmaceutical, chemical, metallurgy, dyes, food, brewing, ceramics, oil refineries,
sewage treatment and other environmental protection industry
