DH300 Temperature Contral Lab Dry Bath Incubator
Description:
DH300 is microprocessor controlled Dry Bath Incubator. Instead of traditional water bath device, the heat-conducting medium is high purity alumium. The exact desired temperature is easily set using the arrow keys on the sloped control panel while values are shown on the large digital display. No checking of a thermometer and readjusting temperature is necessary. The user calibration feature allows for easy calibration to in house standards when required.
This product can be widely used in preservation and reaction of samples, DNA amplification, electrophoresis denaturation and serum solidification, etc.
Features:
1. Energy-efficient Peltier design.
2. Automatic fault detection and buzzer alarm function.
3. Electronic calibration. User can reset to any local standard.
4. Small, compact size uses very little bench space.
5. Easy replacement, cleaning and disinfecting of metal blocks.
6. Built-in over-temperature protection.
7. Internal power supply provided is UL, CSA and CE approved.
8. Customed modules are accepted.
9. Buzzer alarm when temperature control ends.
Parameters:
| Project | Parameters |
| Temp. setting range | 0℃~100℃ |
| Timing range | 1min~99h59min/∞ |
| Display accuracy | 0.1℃ |
| Heating time | ≤12min(from 25℃ to 100℃) |
| Multi points running circularly | Yes(Max 99 times) |
| Auto running | Yes |
| Power | 150W |
| Fuse | 250V 3A φ5×20 |
| Weight(kg) | 2.5 |
| Temp. control range | RT+5℃~100℃ |
| Temp. accuracy | ≤±0.3℃ |
| Multi points running | Yes(Max 5points) |
| Auto heating | Yes |
| Auto resume to run | Yes |
| Voltage | AC220V or AC110V,50/60Hz |
| Dimension(mm) | 260×195×150 |
| Testcondition: RT25℃ ± 2℃, block is 35×1.5ml, use mercurial thermometer, accuracy is ±0.1℃ | |
Optional Blocks:
| Type | Description |
| MD30 | 96×0.2ml |
| MD31 | 54×0.5ml |
| MD32 | 35×1.5ml |
| MD33 | 35×2.0ml |
| MD34 | 15×0.5ml+20×1.5ml |
| MD35 | 96×0.2ml(elisa plate) |
| MD36 | 24×5ml |
| MD37 | 15×10ml |
| MD38 | 12×15ml |
| MD39 | 6×50ml |