Hot Melt Glue Labeling Machine /hot glue labbel machine
1.capacity : 4000-12000BPH
2. type :automatic line
3. CE
Specifications instruction:
easy operation to adjust label cutting knife.
vacuum drum made of high rigid material to avoid friction and static
rapid changeovers: modular design and quick release change parts have changeovers fast and easy in ten minutes
using handle to adjust the position of cutting knife is possible and exactly
vacuum manifold at the lower part of drum and cutter, made of heat & wear resistant material
automatic label length controller to adjust position of I-MARK
Machine description
roll-fed type
label in-fed from label station is conveyed to label in-feed roller through label guide roller
sensors will check I-MARK of label automatically when label reaches label in-feed roller
as soon as the position of I-MARK is confirmed, Encoder will adjust the operation speed of label in-feed roller and then appoint the label cutting position
label which has been cut is conveyed to vacuum drum
after checking label attached on vacuum drum by sensor, label is conveyed to glue roller and then inject hot melt on label
to adjust containers by in-feed star wheel and do labeling in roller zone for the first time and then labeling operation will be done perfectly by side belt.
Safety
control : PLC, inverter
safety attachments
Overload running safety equipment attached on driving zone
Stopper for abnormity operation of in-feed star wheel
No bottle fed (sensor check)
Overload for bottle fed (sensor check)
Hot Melt Glue Labeling Machine /hot glue labbel machine parameter :
Name | Hot Melt Glue Labeling Machine /hot glue labbel machine |
Model | BDX-S |
Labeling type and material | Roll type; OPP, PVC, PAPER, etc. |
Label size | As demanded |
Glue type | Hot melt |
Container diameter | 30-120mm |
Capacity | 8000-25000bottles/hour based on 500ml |
Voltage demanded | |
Supplying electric | 380V x 50/60Hz x 3Phase |
Operating electric | 380V AC, 24V DC |
Consumption | 6.7KW |
Main motor | 1.5KW |
Vacuum pump | 1.5KW |
Hot melt applicator | 2.0KW |
Glue part heater | 1.7KW |
Air pressure supply | 4~6kg/ (dry & clean air) |
Air consumption | 400L/Minute |
Pipe size | 0.375 inch |
Machine size | 1600(w)x4000(L)x1300(H) infeed/discharge conveyor included |
Weight | 2500KG |
Operating condition | 20°C~40°C in dry place at the room's temperature) |
Hot Melt Glue Labeling Machine /hot glue labbel machine pictures :
part of machine photo Hot Melt Glue Labeling Machine /hot glue labbel machine
part of machine photo Hot Melt Glue Labeling Machine /hot glue labbel machine