Specifications
18w tube lamp for bathroom CE Rohs approved1.Power: 18W
2.High CRI
3.Life: >=40000hrs
4.CE&Rohs
| Model No. | Power(w) | Work Voltage (v) | LED QTY(pcs) | CRI(Ra) | Lumens(lm) | CCT (K) | Size(mm) | Lifespan(h) | PF | Working Temperature(°c) |
| BST81218A | 18 | 220 | 176 | ≥85 | 1300 | 2800-6500 | 1200 | ≥40000 | ≥0.98 | -20-50 |
| BST80610A | 9 | 220 | 88 | ≥85 | 722 | 2800-6500 | 600 | ≥40000 | ≥0.98 | -20-50 |
Application Area:
1.Market lighting
Environmental protection and less fever phenomenon with high CRI
2.Subway lighting
Rugged and reliable compared with traditional fluorescent lamp with longer life-span.
3.Office lighting
Offer no noise and favorable lighting to office staff.
4.Parking lot lighting
Fast start with no flicker to protect eye under safety drving.
5.Hotel lighting
Freedom of design comes rich colors creat mood lighting.
Installation:
1. Open the packaging,check whether the products have any damage.
2. Cut off the total swith.
3. If the original ballast is electronic ballast, Remove the original
electronics ballast and old tube at first.then change wiring and install this product.
Quality Control:
Test 1 Parameter Test
--The parament we got from integrating sphere equipment to ensure quality assurance.
Test 2 High voltage Test
--Go through 4000v voltage and test product whether is normal or not,to prevent bad weather like lighting.
Test 3 Pin Test
--Replace traditional fluorescent lamp with uniform lamp holder and dimension of pin to install
Test 4 Ageing Test
--It is two part,first 3seconds turn on and 2seconds turn off till 24 hours;then other 24 hours product will light up all the time.So LED tube can be frequency turn on/off and work normal before send to our customers.
Certificate:
Factory view:
Showroom:
Caution:
1.LED tube and its all fittings cannot withstand any mechanical pressure.
2.Any question about the installation of our LED tubes, please ask for professional guide.
3.If the aluminum pipe is damaged or deformed, please stop using the LED tube to avoid dangers.
4.Before installation, please switch off the electricity, and ensure to install our led tube normally.
5.Please install or place the LED tubes to avoid sunlight and high temperature.
6.It is only used indoors.
Our service:
1.Your inquiry related to our products or prices will be replied in 24 hrs.
2.Well-trained and experienced staffs to answer all your enquires in fluent English.
3.OEM&ODM, any your customized lightings we can help you to design and put into product.
4.Distributoership are offered for your unique design and some our current models.
5.Protection of your sales area, ideas of design and all your private information.
Barrina Lighting,welcome to your enquiry!