IPS panel resolution 1280x800 brightness histogram 7 inch hd field screen false colors ultra wide monitor
USD $1 - $300 /Piece
Min.Order:1 Piece
Zhangzhou Macphoto Electronic Technology Co., Ltd.
This high resolution 7 inch monitor ST-1D/S/O uses IPS technology to provide the best possible picture, with more accurate colour rendering and a wider range of viewing angles. The resolution of the screen is 1280 x 800 pixels, and it has a high brightness of 400cd/m ² and high contrast ratio of 800:1. It features a large array of software functions to help with focus and exposure.The monitor accepts a variety of input sources, HDMI, SDI-HD / SDI-3G, component or composite, which can be selected by using the toggle buttons on the front of the unit.
Monitoring of audio can be done using either the on-board speaker or via the front headphone jack.In bright light conditions, the included folding sun hood can be quickly clipped on to block out unwanted glare and reflections from the sun.
Description | 7" IPS Ultra High Reso 3G-SDI Broadcast Monitor | |
Model | ST-1D/S/O (ST-1D/O: W/O SDI) | |
Resolution | 1280x800 | |
Dot pitch | 0.117(H) × 0.117(V)mm | |
Aspect ratio | 16:9 | |
Brightness | 400cd/m² | |
Contrast | 800:1 | |
Backlight | LED | |
Response time | 15 ms | |
Viewing Angle | 89°/89°(L/R) 89°/89°(U/D) | |
Inputs | 3G/HD/SD-SDI,HDMI,Ypbpr,Video,Audio | |
Outputs | 3G/HD/SD-SDI,HDMI,Ypbpr,Video,3.5mm Audio,Built-in Speaker | |
SDI Support Mode | ITU-R BT.656 | 576i |
SMPTE-125M | 480i | |
SMPTE-274M | 1080i(60/59.94/50) | |
SMPTE-296M | 720p(60/59.94/50/30/29/25/24/23.98) | |
SMPTE-424M | 1080i(60/59.94/50) | |
HDMI Support Mode | 480i / 576i / 480p/576p | |
1080i (60/59.94/50) | ||
720p (60/59.94/50/30/29/25/24/23.98) | ||
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) | ||
Power Consumption | ≤12W | |
Input Voltage | DC 6 ~ 18 V | |
working Temperature | - 10 ~ 55℃ | |
storage Temperature | - 20 ~ 65℃ | |
Install Way | 1/4"-20 Thread Socket(All 4 Sides) | |
Unit Size | 210L × 160W ×41.6H(mm) | |
210 L × 160W × 62 H(mm)(folding) | ||
210L × 160W ×148.9H(mm)(Stretch with sun shade) | ||
Unit Weight | 780g /800g (with sunshade cover, F970battery plate) |
Wider Viewing angle
Enjoy Consistent Images from Any Perspective ST-1D/S/O uses an IPS panel, which provides a wide 178°/178° viewing angle and brightness output of up to 400nit. This means you’ll be able to see accurate, consistent and bright images from any point of view.
Speaker and Stereo Headphone Output
In addition to broadcasting picture, the V-Screen is also equipped with an audio system so you can simultaneously monitor your audio input while watching your picture.
Multiple Inputs and Outputs
Multiple input formats meet the needs of the professional input and display functions with all HD,SD,analogue video signal inputs.The monitor comes with 3G HD-SDI,Composite,and Component Input and Output.
ST1D/S/O has both HDMI SDI in and out,to allow it not only display live signals,but also send them out to other monitors simultaneously.It’s able to display live picture on multiple displays at once while still maintain the original video quality.
1. Peaking Focus Assist in Red outline
2. Brightness Histogram
3. Exposure (Zebra)
4. False Colors
5. Check Field (Mono/ Red/ Green/ Blue)
6. Centre Marker
7. Screen Marker (96%,93%,90%,85%,80%,2.35:1)
8. Full Screen Display in Mode of Monitoring & Recording
9. 4:3 & 16:9 image adjustable
10. Camera 5D II Mode
11. Image Freeze & Flip (U/D, L/R)
12. Front Earphone Jack
13. Pixel-to-Pixel Mode
14. Tally Indicator
Histogram
The Brightness Histogram is a quantitative tool to check the picture brightness.The feature shows the distribution of brightness in an image as graph of brightness along the horizontalaxis (Left:Dark,Right:Bright) and a stack of the number of pixels at each level of brightness along the vertical axis
Exposure
The Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern.
False Color
False color can be intuitive observation and calculation in the scene lighting levels,make brightness or lighting value mapping for the display brightness of false color, from the darkest to the brightest, in turn display blue, cyan, green, yellow, orange and red
False Color Key
To best utilize this feature, you must understand the color chart and have a basic understanding of camera exposure. Normally, when shooting subjects like people, it is common practice to set exposure of faces to the equivalent of approximately 56 IRE. The False Color filter will show this area as the color PINK on the monitor. Therefore, as you increase exposure (open the IRIS), your subject will change color as indicated on the chart: PINK, then GREY, then a few shades of YELLOW. Overexposed subjects (above 101 IRE) on the monitor will be shown as RED. In addition, underexposed subjects will show as DEEP-BLUE to DARK-BLUE, with clipped-blacks indicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of the image that are approximately 45 IRE. This represents a "neutral" or "mid-level" exposure commonly used for objects (not people)
Gift&neutral box 10 pcs/carton
Delivery Information:
SEETEC strives to get all orders out as quickly as possible after QC Dept fully test them!
Shipping Method:
By Express: Fedex,DHL,EMS,TNT,UPS,
By Logistics: by air&sea
Shipping Time:
From Monday to Saturday 8:00am-17:30pm
Shipping Address:
.If by paypal, Please note items will only be shipped to verified users with confirmed shipping addresses
.If by T/T, shipping address as communicate
1.Powerfull Research&Development Experience
2.OEM&ODM Ability
3.Strict QC TEST Control
4.EASY & FAST Communicate
5.Responsible After Service
SEETEC designs and manufactures small HD LCD monitors. Products cover on-camera LCD field monitor, VGA/HDMI/HD-SDI LCD monior, LCD touchscreen monitor,Industril PC etc.
Our products are finely engineered to ease of use, maximum portability, dependability and durability. We make products at the finest quality you can find in the video and photography field.
SEETEC R&D core team leaders are composed by a dozen senior technical engineers have years of experience. They ensure our products are innovative and consistently push the boundaries of both technology and design.
We listen to every customer, and take care of their feedback and advices. It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience.
We have also several years experience in OEM & ODM orders, and we can meet a variety of customized requirements of customers worldwide. If you have any interest or advice, please feel free to contact us.