Specifications
1. smart rfid key finder2.Best helper for finding things
3.Gift for parents,friends lover
4.distance:25-50m
5.OEM
rfid key finder your phone/other things
Welcome To Iwish technology Co., Limited , BEST WISHES!
Service:Your satisfaction, Our Pursuit!
Specification
Dimensions | 57mm×38mm×11mm |
Weight | 21g |
Operational distance | 6~10m (outdoor) |
Operational distance | 3~6m (indoor) |
Battery capacity | 400mAh (lithium-polymer battery) |
Standby time | 600 hours (locator mode) |
Constant working time | 80 hours ( alarm mode) |
Charge time | 2 hours |
Charge voltage | 5V DC |
Charging Battery
Rtiv'r LA battery should be fully charged until the LED turn red (approximately 2 hrs) before first time use.
Rtriv’r App
Before using your Rtriv’r LA, please download and install Rtriv’r camera application on your phone. App can be download by searching for rtrivr in Google Play Store
| |
App Icon | App Menu |
he app work with Android2.1 or above.
urning Rtriv’r LA On and Off
To turn Rtriv'r LA on: press and hold the button down until the LED flash blue slowly ( approximately 3 seconds).
To turn the Rtriv'r LA off: Press and hold the button down until LED indicator flash red and blue alternately (approximately 10 seconds).
To reset Rtriv'r LA : press and hold button down for 15 seconds. The LED will flash red and blue at the same time. (Rtriv'r LA need to be reset when password had forgotten or use default setting on the phone.)
Standby: After the Bluetooth connection had been lost. 5 minutes later the Rtriv’r LA will be in standby and can be located by smart phone.
Pairing Rtriv’r With A Phone
The Rtriv'r LA is an electronic device utilizing Bluetooth technology to communicate with smart phone. So LA need to be paired with phone for the first time use.
1. Tap Bluetooth settings to turn on the Bluetooth and search for the LA
2. Tap Rtrivr that appeared on the list.
3. enter password 0000 on the phone to finish pairing.
Locating Rtriv’r LA
Tap Rtrivr Locator on the phone, it will find and ring the Rtriv’r LA if it is within the range.
Locating The Smart Phone
Press and hold down button 3 seconds to turn on Rtriv’r LA. Then push the button will ring or vibrate the phone.
Anti-Lost Alarm
Tap Rtrivr Locator on the smart phone. It will show 'connected' on the screen when Rtriv’r LA and phone are within a 30 feet range. If ones goes out of range, alarms will be triggered immediately. Alarm can be cleared by tap the phone and push the button on Rtriv’r LA.
Other Settings
Rename the Rtriv’r LA, select the alarm mode of LA and etc can be set in Rtrivr APP.
Exit App
Tap Exit app will terminate the application and the Rtriv’r LA can not find the phone.
Trouble Shooting
1 The phone can not find the Rtriv’r.
Please make sure that Rtriv’r LA is on or in standby mode, and it is within the operation range.
If LED double flashing fast, LA is searching for the previous linked phone. LA should be restarted or wait till to the LED indicator turn double flashing slowly.
2 The Rtriv’r can not find the phone.
The Rtriv’r App was not running.
Bluetooth was turned off on the phone.
Both phone and Rtriv’r LA are too far apart.
3 There is a “force close” dialog shown on the phone.
Restart the Rtriv’r App or phone.
4 Loss password for pairing.
Reset the Rtriv’r LA.
5 Can not rename the Rtriv’r.
The name will be refreshed when Rtriv’r App restart.
6 The volume of ring is low for some smart phone.
Select special mode in the phone settings.
With guaranteed quality, perfect service, fast delivery ……
we are confident about our products, and we also welcome foreign buyers join us to develop new products together !
nbsp;key