Intelligent xenon power inverter supply --- 5KW (1KW ~ 20KW) :
Our main customer are European customers, such as: Barberan Machinery, Cefla, CML Finishing,Giardina Finishing, G Technologies, Finishmetal, UV-ray,…
XENON ARC LAMP DC POWER SUPPLY--HAMAL
l HPE developed the Xenon Arc Lamp power supply to drive Xenon ARC DC LAMP from 3KW to 20KW with Air or Water cooled system.
l Igniter embedded in DC Power Supply makes this machine unique on the market ; It don’t need an extra igniter to turn on the XENON ARC DC lamp.
l Output power is very stable even the input not stable, the output current ripple is less than 0.7%.
l Ideal for medical, cinema projection and industrial applications (PCB, LCD and PDP) where a stable light source is essential.
l FEATURES AND BENEFITS
HAMAL Features | HAMAL Benefits |
|
|
2. True Power Regulator with Magnitude Control |
|
3. Micro-process Dynamic Control |
|
4. High-Speed and Soft Switching IGBT |
|
5. Phase Balance |
|
6. Self-diagnostics and Protection |
|
l TECHNICAL SPECIFICATION
HAMAL Specification | Machine Type | ||
Air Cooled | Water Cooled | ||
Output Characteristics | |||
Maximum Power Output | 3KW~10KW | 5KW~30KW | |
Output Voltage DC | 20V~200VDC | ||
Output Current DC | 200ADC Max | ||
Current Ripple | <0.8% | ||
Input Requirements | |||
24V Maximum Power Consumption | 25W (+Contactor Power Consumption) | ||
220V Fan Power Consumption | 70W | ||
Main Voltage | 400Vac / 230Vac/480Vac/440Vac +/-10%3Phase | ||
Main Current(at 30KW) | 3 x 45A | ||
Main Frequency | 50~60Hz | ||
Electrical Properties | |||
Power Factor | 96% | ||
Ignition Voltage | Up to 30Kv(within 10 microsecond) | ||
Power Line Loading | Symmetrically on 3 Phases | ||
Connection | R, S, T (PE) | ||
Control Range (respect of Max. Power) | 5% ~100% Steppless | ||
Power Accuracy | <1% | ||
Maximum Lamp Cable Length | 15MT | ||
Response Time | 200ms (from stand by to Full Power) | ||
Physical Properties | |||
Ambient Temperature | 0~40°C | ||
Relative Humidity | 30%~60% | ||
Maximum Cooling Liqid Pressure | N/A | 5Bar or 500KPa | |
Dimension L(mm) x W (mm) x H(mm) | 624 x 160 x 342 | 624 x 160 x 342 | |
Weight (Kg) | 21~23 | 18~21 | |
Installed Position | Horizontal or Vertical | Horizontal or Vertical | |
Note: Negative or Positive connection of the lamp cannot be connected to the ground!! Also can not reversed!!
l Machine Dimension
l Electrical Diagram:
One Workshop Corner:
Advanced Italian Testing Device:
Points You May Concern:
1. How much energy we save using these ballasts, instead of normal magnetic ballast and capacitor assembly?
2. How much is the normal life of the lamps with these electronic ballasts.
3. If there is any fault in the ballast, do we have to change the whole ballast or we repair these?
4. Is it possible to repair these ballast here locally afterwards?
5. How much is the life of normal UV lamp with the magnetic ballast and the electronic ballasts?
Answer to the Above:
1. normal magnetic ballast is only two phases, our ballast is three phases,
there are no phase loss, saving 33.3%; magnetic transformer efficiency is less than 80%,
our ballast efficiency is higher than 90%2. our ballast can stay at 5% for standby, normal magnetic ballast can stay at 40% only.
3. It is easy to repair the ballasts if there is small problem, just change some spare parts, the design is very compacted. when you see our product, you can understand how is it working.
4. Yes, the life time of the lamp will increase above 20% based on working condition.
Our Projects for Your Reference. : )
Air Mail Service(Above 3 sets) or Express(Below 3 Sets), Advice Only, Charged by Buyers' Own!