Grey high thermal conductivity thermal phase change materials PCM TIC808G
The TIC™808G Series is low melting point thermal interface material. At 50℃, The TIC™808G Series begins to soften and flow, filling the microscopic irregularities of both the thermal solution and the integrated circuit package surface, thereby reducing thermal resistance.The TIC™808G Series is a flexible solid at room temperature and freestanding without reinforcing components that reduce thermal performance.
The TIC™808G Series shows no thermal performance degradation after 1,000 hours@130℃,or after 500 cycles, from -25℃ to 125℃.The material softens and does not fully change state resulting in minimal migration (pump out)at operating temperatures.
Features
》0.014℃-in² /W thermal resistance
》Naturally tacky at room temperature, no adhesive required
》No heat sink preheating required
Applications
》High Frequency Microprocessors
》Notebook and Desktop PCs
》Computer Serves
》Memory Modules
》Cache Chips
》IGBTs
| Typical Properties of TIC™808G Series | |||||
Product Name | TICTM805G | TICTM808G | TICTM810G | TICTM812G | Testing standards |
Color | Gray | Gray | Gray | Gray | Visual |
Composite Thickness | 0.005" (0.126mm) | 0.008" (0.203mm) | 0.010" (0.254mm) | 0.012" (0.305mm) | |
Thickness Tolerance | ±0.0008''(±0.019mm) | ±0.0008" (±0.019mm) | ±0.0012" (±0.030mm) | ±0.0012" (±0.030mm) | |
Density | 2.6g/cc | Helium Pycnometer | |||
Work Temperature | -25℃～125℃ | ||||
phase transition temperature | 50℃~60℃ | ||||
Setting temperature | 70℃ for 5 minutes | ||||
Thermal conductivity | 5.0 W/mK | ASTM D5470 (modified) | |||
Thermal lmpedance @ 50 psi(345 KPa) | 0.013℃-in²/W | 0.014℃-in²/W | 0.038℃-in²/W | 0.058℃-in²/W | ASTM D5470 (modified) |
0.08℃-cm²/W | 0.09℃-cm²/W | 0.25℃-cm²/W | 0.37℃-cm²/W | ||
Standard Thicknesses:
0.005"(0.127mm) 0.008"(0.203mm) 0.010"(0.254mm) 0.012"(0.305mm)
Consult the factory alternate thickness.
Standard Sizes:
9" x 18"(228mm x 457mm) 9" x 400'(228mm x 121M)
TIC™800 series are supplied with a white release paper and a bottom liner. TIC™800 series is available in kiss cut an extended pull tab liner or individual die cut shapes.
Peressure Sensitive Adhesive:
Peressure Sensitive Adhesive is not applicable for TIC™800 series products.
Reinforcement:
No reinforcement is necessary.
