High quality esd table mat
Specifications:
1. Rubber sheet
2. two layers
3.Color available; green ,blue, grey,etc
4.glossy or dull surface
5. Color light green
6.Size: width 1.2m X length 10m / 1.0m X 10m / 0.9m X 10m / 0.8m X 10m / 0.6m X 10m / 0.4m X 10m ; customization
7. Thickness : 2.0mm
ESD Rubbr Mat Description:
1.Anti-static rubber mat or ground mat should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits etc.
2.To eliminate damages caused by static electricity;When anti-static rubber mat (ground mat) are laid out and grounded, the working surface will discharge the static electricity of human bodies so that a near-equipotential can be maintained for tweezers, tools, utensils and instruments, through which human bodies contact the working table and static sensitive devices(SSD) are free from broadband interference produced by static discharging such as triboelectrification etc. In this way, electrostatic protection is realized.
Parameter of Esd Table Mat (thickness: 2mm ) | ||
Static Dissipation layer | Surface resistance | 107-109 Ω |
Friction static voltage | <100V | |
Conductive layer | Surface resistance | not exceed 106Ω |
Friction static voltage | <50V | |
Static decay time | 5000V-500V | <1.9s |
Volume resistance | 107-1010 Ω | |
Test Item | Test Result | |
Tension Strength | 3.6Mpa | |
Breakage coefficient of elongation | 188% | |
Tear strength(right angle) | 20.6KN/M | |
Resilience (6pcs sheets lapping over) | 14% | |
Temperature of impact embrittlement (not cut) | -25°C No damage | |
Permanent variation under 70°C*22h, 25% compression | 17.9% | |
Aging in hot air(70°C*22h) | Variation of tension strength | +8.0% |
Variation of breakage coefficient of elongation | -3.8% | |
Heat loss | 1.08% | |
Test Standard: GB1040, GB/T529, GB1681, GB5470, GB10654, GB/T7141
| ||
