Tracking Index Test Apparatus + IEC 60112 + CTI
Introducation :
- The IEC60112 Tacking Test Apparatus is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator.
- Inside the well lit cabinet, a test specimen is placed on a glass plate and two platinum electrodes are lowered onto the top surface.
- A gauge block is supplied with the instrument to ensure the electrodes have the proper distance between them. The table height is easily adjustable to ensure the proper angle of the electrodes and height of drops. The rest of the test is controlled from outside the test chamber with the door closed.
- The voltage,limiting current, drip rate and number of drips are all set on the control panel. An operator should observe the test to see if a flame ignites. The instrument sounds an alarm if there is a tracking failure of at least two seconds.
- Reference to iec60112 iec60335 iec60598 standard
technical parameters:
Electrode Materials | The electrode caput of brass-platiniridium | |
Electrode Distance | 4.0mm±0.1mm,60±5°angle | |
Test Voltage | 100~600V adjustable, displayed value: r.m.s | |
Test Current | Current limiting 1A±0.1A adjustable, | |
| displayed value:r.m.s, tolerance of 1.5% | ||
Electrode Dimensions | width: 5mm±0.1mm, | |
| thickness: 2mm±0.1mm, | ||
| length >12mm, | ||
| end chisel-edge angle : 30°±2°,platinum. | ||
Electrode Pressure
| 1.00N±0.05N | |
Dripping Nozzle | outer diameter: 0.9mm~1.2mm for solution A | |
| 0.9mm~3.45mm for solution B | ||
| Dripping Interval | 0-99 seconds (adjustable),the time for 44-55/1cm3 (adjustable)drops to fall on the specimen shall be (30±2)min | |
Heigh Drops | 30-40mm±5mm(adjustable) | |
Control | Using single chip microcomputer + touch screen control | |
Volume Of Chamber | >0.5m³, black interior | |
Outer Dimensions | W*D*H=1100mm*700mm*1300mm | |
Power Supply | 800VA ,220V, 48-60Hz | |
The electrode caput of brass-platiniridium
Packaging: Wooden Case
Shipping Method: Express/By Air/By Sea
Company information
HONGKONG AUTOSTRONG TECHNOLOGY CO,.LTD
HONGKONG AUTOSTRONG TECHNOLOGY CO,.LTD is a high-tech company in Hongkong,who is engaged in research and development,manufacture of test instrument,whose headquater is in Kowloon,Hongkong,with branch offices in Shenzhen.
AUTOSTRONG is one of leading enterprises in Hongkong on R&D and manufacture of testing instruments.we supply standard or customized solutions and products for many test,measurement and quality control tasks required in the world of cable,wire,socket,plug,switch,plastic and rubber testing.All of our products are complying with the requirements of many standards,such as IEC,UL,VDE,VS,JIS,GB and so on.
Products include:Glow wire tester, Needle flame tester, horizontal and vertical burning tester, tracking tester,textile burning tester,protective clothing thermal conductivity tester,automotive interior combustion tester ,melt dripping tester,building materials flammability tester,friction tester,test finger,spring hammer,universal testing machinge and other testing instruments.
AUTOSTRONG strategic cooperation with Germany WAZAU,Germany PTL company,Germany FISCHER,Japanese minebea,and on going technical exchange.
AUTOSTRONG spirit:integration of science and wisdom,quality and service co-exist,face to the world,to achieve a win-win for the supply and demand.