Single Tube Short Wave Infrared Heater Lamps
Product name | Short Wave IR Lamp |
Tube diameter | 10/11/12mm |
Total length/Heated length | 626mm/508mm |
Power/Voltage | 2000W/240V |
Wavelength range | 0.75-1.4um |
Response Time | 1s |
Electric heat transformation rate | >98% |
Filament Temp | 2200℃ |
Max Heating Length | 6400/ 2400 mm |
Warranty Time | 1800 ° - 2400 °C |
High Power Density | up to 200w/cm |
Heating Filament | Tungsten |
Gold Coating Infrared Heater
White Plating Infrared Heater
Transparent Infrared Heater
Technical Specifications List
|
|
| Diameter |
|
|
|
|
SWIR10241x | 120 | 500 | 10 | 241 | 142 | clear | X |
SWIR10218X | 120 | 500 | 10 | 218 | 142 | white | X |
SWIR10227 | 235 | 500 | 10 | 227 | 127 | white | SK15 |
SWIR10216 | 235 | 700 | 10 | 216 | 150 | white | SK15 |
SWIR10370x | 235 | 1000 | 10 | 370 | 280 | clear | X |
SWIR10370X | 235 | 1000 | 10 | 370 | 280 | white | X |
SWIR10350y | 235 | 1000 | 10 | 350 | 280 | clear | Y |
SWIR10355Y | 235 | 1000 | 10 | 355 | 280 | white | Y |
SWIR10355x | 235 | 1000 | 10 | 355 | 280 | clear | X |
SWIR10355 | 235 | 1000 | 10 | 355 | 280 | Gold | SK15 |
SWIR10370X | 235 | 1000 | 10 | 370 | 280 | white | X |
SWIR11550 | 230 | 2000 | 11.5 | 550 | 497 | clear | R7s |
SWIR11657 | 230 | 2000 | 11.5 | 657 | 500 | gold | sk15 |
SWIR11350 | 235 | 2000 | 11.5 | 350 | 286 | white | V |
SWIR11370 | 235 | 2000 | 11.5 | 370 | 288 | clear | X |
SWIR11512x | 400 | 2000 | 11.5 | 512 | 416 | clear | X |
SWIR11512X | 400 | 2000 | 11.5 | 512 | 416 | white | X |
SWIR11512x | 400 | 2000 | 11.5 | 512 | 410 | clear | X |
SWIR11512X | 400 | 2000 | 11.5 | 512 | 410 | white | X |
SWIR11731u | 480 | 2500 | 11.5 | 731 | 635 | clear | U |
SWIR11731U | 480 | 2500 | 11.5 | 731 | 638 | gold | U |
SWIR11787 | 230 | 3000 | 11.5 | 787 | 700 | clear | SK15 |
SWIR11787 | 230 | 3000 | 11.5 | 787 | 700 | white | SK15 |
SWIR11802X | 400 | 3000 | 11.5 | 802 | 700 | Gold | X |
SWIR11802X | 400 | 3000 | 11.5 | 802 | 700 | white | X |
SWIR111062u | 240 | 3200 | 11.5 | 1062 | 815 | clear | U |
SWIR111061 | 480 | 3650 | 11.5 | 1061 | 965 | Gold | R7s+LEAD |
End base types and drawing of lamp
About Our Company
Hefei Quickly Electric Co.,ltd is a manufacturer of high quality Quartz electric heating elements. We proudly manufacture every elements we sell. Every element is manufactured from high quality materials sourced from both domestic and foreign suppliers. We make the finest quality elements in the market.
Drying oven for coating/reflector on quartz tube
RFQ
1.Why Quartz Glass as the one main of material?
The choice of quartz glass is not a coincidence: this extraordinary material is totally transparent at IR radiation, can withstand constant working temperatures of more than 1000°C and it is resistant to chemical corrosion.
2.Typs of Quartz tubes
Quartz uses two kinds of quartz tubes: single tube and twin tube. The twin tube provides the best mechanical resistance, thanks to its reverse "H" shape, and it allows to manufacture emitters up to 6,5 meters in length.
3.Why Reflector
All of our emitters can be coated with a layer of gold or ceramic as reflectors. The gold/ ceramic coating can concentrate the heat, increasing the effectiveness of the heat output.
The emitters with coating are highly economical, converting practically all the consumed electrical power into heat.
4.The lamp can be used in vertical Orientation?
Yes, it can be used in vertical basides in horizontal position,see as the below picture
The first step in designing or purchasing a Quartz element is determining if it is mounted in a horizontal or vertical position. Typically, Quartz elements are mounted in a horizontal position. This is the simplest design. However, some applications require the element to be in a vertical position. The only difference that makes in the design of the element is that the element coil cannot be stretched; it must be tightly wound such that it can support itself in a vertical position. This requires additional processing on the coil to form an insulating coating on the wire so there is no electrical contact between the turns of the coil. Vertical or Close Wound coils are not a problem for us. We can make these in any length, but due to the more stringent physical specifications of the coils, some designs may not be possible. Note: A minimum purchase is required for these elements due to the extra processing required.
uld you supply clamps for lamp installing ?
Yes, we will provide mounting clamps for clients, and the corresponding clamps quantity with purchased lamps are supplied freely bu us.
6. What information i need to confirm before sending inquiry
Input Voltage, Wattage, Overall Length ( including ceramic base), Heated Length, Tube Diameter, Reflector Type, Lead wire (length);
7. How does your factory do quality control
" quality is priority", we always and keep paying more attention to QC from the material purchasing to the lamps' packing. Our product have gained CE, ROHS, ISO9001.
8. How you do lamps package?
9. How To make the shipping and payment?