The control panel of industrial dehumidifier cfz-40s The details of industrial dehumidifier cfz-40s
The Function and feature of industrial dehumidifier cfz-40s LCD Display Failure Code Display Humidity Set At Will Three-Minute Automatic Delay Protection of the Compressor The principle of the industrial dehumidifier cfz-40s (1% Humidity Exact Control by computer, humidity LCD Display) With mature technique, Songjing Commercial dehumidifier adopt refrigeration principle to dehumidify air. International Brand Compressor with high Energy-Efficient, Large Air Circulation with External Rotor Fan Great Structure, Strong Dehumidify Ability, Automatic Control and Convenient Operation The parameter of the industrial dehumidifier cf-40s
Warn and notice of the industrial dehumidifier cfz-40s The dehumidifier adopts microcomputer control, and humidity sensor is precision instrument, and it would result into the equipment out of use in the strong corrosive gas and heavy dust environment (the warranty time of humidity sensor would be in half year) Please read this booklet carefully when using this microcomputer dehumidifier, forbidden to operate without the demand and switch control at random, which avoid damage the computer control components This machine not equipped with anti-explosion function, so forbidden to use it in special environment with things such as: flammability and flammable gas, dust, chemical products and biology products The power connected to this machine must connect to the earth and alternating current of 220v/50hz (the CFZ series with 380v/50hz), the power cord should in accordance with power, the rated current should be set according to the user manual To maintain the machine regularly, let the machine take a rest after long-time operation If they are any difference between the picture in this catalog and the real machine, please subject to the real machine,
Notice: Should be used on solid flat ground to avoid the noise created by machine shake Check the voltage and machine is consistent, not using a common socket with other electrical appliance Do not place machine near a heat source, to avoid increasing power or accident Moving or handling the machine, do not let machine 45 tilt The dehumidifier would frost or frozen when the machine runs less than the temperature of 18 c, if the machine owns defrost function, then, it would automatic defrost, unless necessary, do not run it under low temperature Reservations using this machine should be noted that not less than50cm-100cm around the room When continuously drainage, please handle the external drainage assembly correctly For the different structure of conditioner, when it runs in a small room, the temperature would rise slightly In better ventilation place, the dehumidify effect would not so significantly) In the low temperature and low humidity condition, the dehumidify capacity would reduce or not dehumidify, which are considered normal (the ambient temperature<10c, humidity<45%)
Machine in Trouble Unplug immediately Troubleshooting according to the manual If you cannot exclude the trouble according to the manual, please contact the wholesaler or factory directly.
The application of the machine
A corner of the machine workshop: |
