Hydraulic Cable Puller /SA-YQ90 Hydraulic Puller
Application
Hydraulic Cable Puller /SA-YQ90 Hydraulic Puller is applicable to release wire, ground wire, cable in transmission line project.
Characteristic
1.infinitely variable speed and linepull control ,the pull in the rope can be read on the line pull gauge .
2.the max pull for conductor –stringing operation can preset ,automatic overpull protection system .
3.spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
4.hydraulic pull rope clamp ,replacing steel conveniently .
5.attached reel winder with automatically level wind .load and unload conveniently .
Main component :
1. engine :Cummins (USA)water –cooled diesel engine .
2. main variable displacement pump ,main motor :Rexroth (BOSCH)
3. Reducer : Rexroth (BOSCH)
4. Main hydraulic valves: Rexroth (BOSCH)
5. Radiator :AKG
6. Hydraulic instrument :WIKA
7. Mating with model GSP1400 drum (order number :07125C)
8. If you choose Cummins(DONGFENG) water –cooled diesel motor ,the mode is “YA-YQ90D”,order number:07042.
Technical Data for Hydraulic Cable Puller /SA-YQ90 Hydraulic Puller
Product | 40KN hydraulic puller |
Type No. | SA-YQ90 |
Maximum linepull (kN) | 90 |
Continuous linepull (kN) | 80 |
Maximum linespeed (km/h) | 5 |
Bullwheel bottom of groove diameter(mm) | Φ520 |
Bullwheel grooves number | 7 |
Maximum suitable steelrope diameter (mm) | Φ20 |
Maximum through connector diameter (mm) | Φ60 |
Engine power /speed (kW/rpm) | 121/2500 |
Dimensions (mm) | 3500×2100×2500 |
Weight (kg) | 4300 |